[bobplum]

when does a fan jet stop becoming a fan jet .............when it decides to become a pencil jet half way thru the day the fan jets splutter a little,so done the usuall blow job on them checked everything reassembled and now i have pencil jets
As this happened to anyone else,whats the answer

[H S and Son]

Have you a pre-filter between your tank and reel?

[Smudger]

Sounds like you still have dirt stuck in your pipe.

not mhappened with gardiners fans but it has happened and i used a fine artists paint brush down the stem to
clear it out and 'back flush' with pure

Darran

[Frankybadboy]

your flow to low

[bobplum]

Have you a pre-filter between your tank and reel?

yes,

[bobplum]

Sounds like you still have dirt stuck in your pipe.

not mhappened with gardiners fans but it has happened and i used a fine artists paint brush down the stem to
clear it out and 'back flush' with pure

Darran

i will strip down later and double check,but would it happen to both jets?

[bobplum]

well i have don it now,broke the buggars,thought i would be a smart arse and knock them out and have a good luck but because they are the new super lite plastic fan jets they simply snapped
well back to pencil jets must admit was liking the fan jets
probably order the metal ones in the new year

[Avo]

Flow and pressure weak somewhere for them to stop fanning

[Avo]

well i have don it now,broke the buggars,thought i would be a smart arse and knock them out and have a good luck but because they are the new super lite plastic fan jets they simply snapped
well back to pencil jets must admit was liking the fan jets
probably order the metal ones in the new year

I must say there better than the metal ones.. They rinse super quick... I've got two brushes running the new jets.

[bobplum]

we use the same pressure/flow,nothing as far as i am aware as changed complete mystery

[A & J Owen Window Cleaning]

i would invest in a bike pump and the adapter for blowing up footballs . take the hose to the pole splinter the pump the poop out mate then reconnect.

[Ian101]

we use the same pressure/flow,nothing as far as i am aware as changed complete mystery

maybe u stick to plumbing 

[Smudger]

  - Dont throw them away !

i have a mod that you can do - it does not matter if the stem has snapped off.

just gotta do some piccy's etc..  will try to post before the new year ( wont be capable after...... )

Darran

[VSP Home Care]

Flow and pressure weak somewhere for them to stop fanning

I suspect this is correct, I went out today and noticed my fans had also turned to pencils, I upped the pressure a little and it improved somewhat.  Then I noticed there were air bubbles in the line to the jets, then I noted a tiny leak on the output of the pump.  I've not bothered to fix it yet mind 

Come the morning I'll have another look and prove it one way or another.

[bobplum]

we use the same pressure/flow,nothing as far as i am aware as changed complete mystery

maybe u stick to plumbing 

when i return your 65ft brodex tomorrow,dont bend over.....because i will make it fit