Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

bobplum

  • Posts: 5602
goose neck and aqua adapter
« on: December 02, 2011, 05:27:36 pm »
can you use the aqua adapter with a goose neck all the vids i have seen seem to show the ordinary angled crank
cheers bob

Smudger

  • Posts: 13459
Re: goose neck and aqua adapter
« Reply #1 on: December 02, 2011, 06:26:57 pm »
Yes - as  long as the gooseneck has the tapered thread - you can get an adaptor
to fit gardiners quick release c/f goosenecks

Darran
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

dave f

Re: goose neck and aqua adapter
« Reply #2 on: December 02, 2011, 09:59:13 pm »
ive used a aquadapter with goose neck with a slx but ive found that after a while the first clamp on the slx splits as you tend to put a bit presure on the end ive gone throgh 2 so ive gone back to plastic angle

Aqua-dapter

  • Posts: 418
Re: goose neck and aqua adapter
« Reply #3 on: December 03, 2011, 12:02:25 am »
Hi bob,

You can also put an Extended Angle Adapter / Angle Crank on the Aqua-dapter.

They're available in 6" 9" and 12" varieties.

Paul

bobplum

  • Posts: 5602
Re: goose neck and aqua adapter
« Reply #4 on: December 03, 2011, 11:26:00 am »
Hi bob,

You can also put an Extended Angle Adapter / Angle Crank on the Aqua-dapter.

They're available in 6" 9" and 12" varieties.

Paul
[/quote

can i use a resi neck with the aqua adapter,so the lay out would be ,Pole,Aqua-adapter,resi neck,brush?
cheers bob

Aqua-dapter

  • Posts: 418
Re: goose neck and aqua adapter
« Reply #5 on: December 03, 2011, 11:31:12 am »
Hi Bob,

Yes, you can use a resineck, or a FlipFast, on the Aqua-dapter.

The order you've put is correct: Pole > Aqua-dapter > Resi-Neck > Brush

Paul

bobplum

  • Posts: 5602
Re: goose neck and aqua adapter
« Reply #6 on: December 03, 2011, 11:59:47 am »
Hi Bob,

Yes, you can use a resineck, or a FlipFast, on the Aqua-dapter.

The order you've put is correct: Pole > Aqua-dapter > Resi-Neck > Brush

Paul

many thanks
bob