[Eddie_Rhone]

I was looking at the new 6.6 vacs that are appearing in new portables and noticed that Lamb Ametek do a slightly smaller version that draws 6.1 amps on their performance schedule if you had 2 of these in a portable with a pumptec pump drawing 0.7 amps would that work on one cord. I am not very technical so there may be a very obvious reson why this would not work but just curious as the smaller vac produces about 90% of the vac of its big brother which could give hose lengths of over 100 feet on one electrical cord.

All thoughts welcome.

Regards

Eddie

[Mike Halliday]

I'm not too technically minded but don't motors have 2 measurements, a large start up  and then it settles down lower. so they might be Ok once running but blow the fuse on start up.

I had a Cheyenne with 2 vacs & a pump which ran off one power cord but the pumps was only 100psi