Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Supreme clean window cleaning

  • Posts: 236
got a problem with pump
« on: April 14, 2011, 03:12:42 pm »
hello i have a shuflo pump and veristream digital controller, the prob i have is when i shut the tap off its stop fine like it should but when i put the tap back on the pump dont start back up again. I have to tern the controller off and on so the pump starts again,  does any one know what the problem is they are both 1 and half years old thanks for any help

Supreme clean window cleaning

  • Posts: 236
Re: got a problem with pump
« Reply #1 on: April 14, 2011, 05:42:16 pm »
bump

Re: got a problem with pump
« Reply #2 on: April 14, 2011, 05:51:39 pm »
Bump.

Bumpy around here, innit?

The problem won't be the Shurflo - £ to a penny it's the 'digital' varistream playing up.

Check out the blue dial inside and turn it this way and that in an experiment to find out why the hell it's ruining your life.  Well, it seems like it, doesn't it?  You don't need this kind of carp.

Check the varistream first.

ScrimShady

  • Posts: 647
Re: got a problem with pump
« Reply #3 on: April 14, 2011, 05:58:06 pm »
my digital varistream dosent start straight away it take a few seconds before the pump starts. but if it dosent start at all then look at the varistream, i rang williamson pumps once about a unit i had and they are very helpful and gave me loads of advice. i would ring them if you get stuck

Re: got a problem with pump
« Reply #4 on: April 14, 2011, 07:08:52 pm »
my digital varistream dosent start straight away it take a few seconds before the pump starts. but if it dosent start at all then look at the varistream, i rang williamson pumps once about a unit i had and they are very helpful and gave me loads of advice. i would ring them if you get stuck

As usual it's the controller at fault.  Why does anyone use them anymore?   ???

ScrimShady

  • Posts: 647
Re: got a problem with pump
« Reply #5 on: April 14, 2011, 08:10:27 pm »
i only find this with the digital ones i have the mk2 varistreams and they are brilliant....

NJWindowCleaning

  • Posts: 521
Re: got a problem with pump
« Reply #6 on: April 14, 2011, 09:06:49 pm »
Think it might be down to the cali might be set to low to start pump back up. My flow rate is set at 80 and my cali is 30 as when I first had the digital variflow I had it set to low and the pump wouldnt turn on straight away. Its more like a hit and miss, so try setting the cali up different until pump comes on. Hope this helps.  ;D ;D

Frankybadboy

  • Posts: 9024
Re: got a problem with pump
« Reply #7 on: April 15, 2011, 07:54:40 am »
my digital varistream dosent start straight away it take a few seconds before the pump starts. but if it dosent start at all then look at the varistream, i rang williamson pumps once about a unit i had and they are very helpful and gave me loads of advice. i would ring them if you get stuck

As usual it's the controller at fault.  Why does anyone use them anymore?   ???
nothing wrong with the controller,just needs to be set up right.

Blue Frog Systems

  • Posts: 3813
Re: got a problem with pump
« Reply #8 on: April 15, 2011, 08:05:54 am »
try your connections... i had a similar problem not long ago and it was bad connections causing my problem
Only those who risk going too far will truly know how far they can actually go

Supreme clean window cleaning

  • Posts: 236
Re: got a problem with pump
« Reply #9 on: April 15, 2011, 04:52:16 pm »
Thank for all your replys I tried every thing never sorted it so bought a new one and all good now roll monday