[Crystal-clear]

The metal part that holds the brush is loose... it is sliping out and spinning.

Gardiners sent me some Toughend Acrylic (the little black and green thingy) but that was to fix my base cap cos that was slipping to,would toughend Acrylic suit the metal part that fits in the pole so would it glue it good?

the metal part and the bit of pole is a little bit wet but i will hair dry it if this glue will work.

I am hoping to fix it 2night, i dont wana use my extel again.

[windiewasher]

araldite m8

The metal part that holds the brush is loose... it is sliping out and spinning.

Gardiners sent me some Toughend Acrylic (the little black and green thingy) but that was to fix my base cap cos that was slipping to,would toughend Acrylic suit the metal part that fits in the pole so would it glue it good?

the metal part and the bit of pole is a little bit wet but i will hair dry it if this glue will work.

I am hoping to fix it 2night, i dont wana use my extel again.

[Crystal-clear]

bah so its a different glue  ? i guess i should call them up tomorrow and ask them to post it to me ?

[Jays Window Cleaning]

I had the same problem i use araldite b & q sell it . Use some sand paper on the metal bit to score it a little wipe off the dust with a dry cloth this helped it stick better .

jay

[Lee GLS]

The metal part that holds the brush is loose... it is sliping out and spinning.

Gardiners sent me some Toughend Acrylic (the little black and green thingy) but that was to fix my base cap cos that was slipping to,would toughend Acrylic suit the metal part that fits in the pole so would it glue it good?

the metal part and the bit of pole is a little bit wet but i will hair dry it if this glue will work.

I am hoping to fix it 2night, i dont wana use my extel again.

I used that green and black glue from gardiners to glue my thread back in and it worked fine.

[Crystal-clear]

The metal part that holds the brush is loose... it is sliping out and spinning.

Gardiners sent me some Toughend Acrylic (the little black and green thingy) but that was to fix my base cap cos that was slipping to,would toughend Acrylic suit the metal part that fits in the pole so would it glue it good?

the metal part and the bit of pole is a little bit wet but i will hair dry it if this glue will work.

I am hoping to fix it 2night, i dont wana use my extel again.

I used that green and black glue from gardiners to glue my thread back in and it worked fine.

SO lee , that green and black thing (penloc toughened acrylic glue) worked a dream? its worth a shot now then? rather then wait till tomorrow cant get to bnq now.

[♠Winp®oClean♠]

The metal part that holds the brush is loose... it is sliping out and spinning.

Gardiners sent me some Toughend Acrylic (the little black and green thingy) but that was to fix my base cap cos that was slipping to,would toughend Acrylic suit the metal part that fits in the pole so would it glue it good?

the metal part and the bit of pole is a little bit wet but i will hair dry it if this glue will work.

I am hoping to fix it 2night, i dont wana use my extel again.

I used that green and black glue from gardiners to glue my thread back in and it worked fine.

SO lee , that green and black thing (penloc toughened acrylic glue) worked a dream? its worth a shot now then? rather then wait till tomorrow cant get to bnq now.

Yes it should work just fine. I've stuck allsorts of stuff with that glue!

[Crystal-clear]

how do i open that glue it seems sealed shut lol.

[TomCrowther]

I poked a nail through each side. I had the same problem and the glue they sent worked fine, no probs since.

[Crystal-clear]

ok lol got it open eeeeewww its guey and strong smell! oh and red!

[Crystal-clear]

its a bit like aqua fresh when it comes out , placed it all over the metal part, a thin layer and left it to dry in a warm part of the house will it be good to use by tomorrow morning?

[Londoner]

how do i open that glue it seems sealed shut lol.

Ha ha, the glue is so good you can't get the top off.

[♠Winp®oClean♠]

its a bit like aqua fresh when it comes out , placed it all over the metal part, a thin layer and left it to dry in a warm part of the house will it be good to use by tomorrow morning?

Yes.

[Crystal-clear]

its been drying for 4 hours can i play with it now ;?

[Lee GLS]

It depends what you are talking about 

[♠Winp®oClean♠]

It depends what you are talking about 

 

[Crystal-clear]