[geefree]

Do i replace  the pole section,.. the clamp lever ...... because the screw part is stretched....

or the clamp ring ..?....(god knows why you cant buy the whole clamp in one ) seperate them and make more money i suppose

Anyway , its the first section starting to spin when i have tightened it.

Thank you 

[Lee GLS]

you need to change the clamp first then change the pole section if the new clamp doesnt work

[geefree]

Thanks Lee,

The whole thing? the bits are seperate.

[Lee GLS]

may as well replace the whole thing, to clamp and lever rub against each other so both will wear.

[Mike #1]

depending on pole , xtel poles you only need to change clamp levers  and possibly clamp bands as well this should sort it also the screw and nut's for them as well

[Llaaww]

I cut and fitted plastic shims to the inside of the clamp, it reduced the diameter and took up the slack of the worn pole. They work well but need to be well glued.

[paul saunders]

Wintecs sell complete clamps for Xtel poles.

[geefree]

Thanks guys.

[Londoner]

It seems to me I have spent years replaceing sections and clamps. By the time the clamp has gone the pole section has worn as well giving tight/ loose spots which can be very annoying.
Now I just buy another pole and be done with it.

[geefree]

it seems all i can find is pole section 2 ... and clamp 2... clamp 2 would prob be the one.