Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: M.J.M on September 14, 2020, 10:45:44 pm

Title: Using your machine as a truckmout
Post by: M.J.M on September 14, 2020, 10:45:44 pm
I have an airflex pro with a external magma and a vac pod I always use the 3 vacs no matter what. Very good drying times.    Anyway. I have never used it as a van mount how are you filling  the tank with a bucket or X hose.  Hose pipe. To customer. Garden tap. And what  security like   doors open and that

Title: Re: Using your machine as a truckmout
Post by: neil 47 on September 15, 2020, 07:29:10 am
I tried it , and found it to be a pain .

Long extensions
Extra hoses
Filling and emptying a pain
Carrying extra water.

If your fit and healthy just take it off the van , it’s faster ,quicker and easier ( for me anyway) .

Title: Re: Using your machine as a truckmout
Post by: M.J.M on September 15, 2020, 08:27:00 am
I thought that. Thanks Neil.
Title: Re: Using your machine as a truckmout
Post by: Adrian Marsh on September 15, 2020, 08:33:00 am
Can also depend on circumstances. I use an Alltec Triple Vac. I loath dragging it over a gravel drive so will use it van mounted. Over sixteen years it's created a problem on only a couple of occasions.
Title: Re: Using your machine as a truckmout
Post by: elliott cleaning on September 15, 2020, 06:27:19 pm
Your heading is a misconception of the word truckmount.
A truckmount is not only the machine which heats the water and vacuum it out of the carpet but also normally has a 250 litre fresh water tank as well as a similar waste tank. So no having to fill and empty tanks every two minutes. Far more efficient in operation to a portable even if you leave that on the van.
If it’s to much effort taking a portable off your van go for a truckmount - it’s a no brainer. You’ll find the time saving will increase the amount of work you can fit into a day.
Title: Re: Using your machine as a truckmout
Post by: M.J.M on September 16, 2020, 08:04:44 am
Ok thanks for the he replies
Title: Re: Using your machine as a truckmout
Post by: Robin Ray on September 16, 2020, 04:08:21 pm
Your heading is a misconception of the word truckmount.
A truckmount is not only the machine which heats the water and vacuum it out of the carpet but also normally has a 250 litre fresh water tank as well as a similar waste tank. So no having to fill and empty tanks every two minutes. Far more efficient in operation to a portable even if you leave that on the van.
If it’s to much effort taking a portable off your van go for a truckmount - it’s a no brainer. You’ll find the time saving will increase the amount of work you can fit into a day.

I find it amazing that fresh water tanks are an optional extra on all Truckmounts. In the spirit of what a TM is meant to be they should really be included.
Title: Re: Using your machine as a truckmout
Post by: Robin Ray on September 16, 2020, 04:20:16 pm
I have an airflex pro with a external magma and a vac pod I always use the 3 vacs no matter what. Very good drying times.    Anyway. I have never used it as a van mount how are you filling  the tank with a bucket or X hose.  Hose pipe. To customer. Garden tap. And what  security like   doors open and that

Airflex pro machines will draw from a water tank simply by putting the hoses from the solution tank into a tank. If you fit a water  tank in the van you will never have to fill again. You can set up auto empty with a simple one way valve in a hose on the waste tank, Cleansmart sell these. This means in most cases you never need to empty again. As for heat fill the tank with hot water in the morning and bring the magma to the door of the job. And for hose runs most of the time by van mounting you are only adding about 25 ft of hose to each job, most machines can cope with little bit of extra length, you can always take hose off as you get closer to the door.
Title: Re: Using your machine as a truckmout
Post by: Shaun_Ashmore on September 16, 2020, 06:32:26 pm
Some people have direct water supply so don’t require heavy water to carry around also a sales tactic is to itemise the parts to break the price up.
Title: Re: Using your machine as a truckmout
Post by: Robin Ray on September 16, 2020, 06:34:53 pm
Some people have direct water supply so don’t require heavy water to carry around also a sales tactic is to itemise the parts to break the price up.

Thats true.. but the vast majority of TM users have a fresh water tank. Its a bit like selling shoes with optional laces. ;D
Title: Re: Using your machine as a truckmout
Post by: M.J.M on September 16, 2020, 09:01:36 pm
Thanks I have a tank in my van it's pure   water 200 tank. I have a window cleaning round   Now I  have a plan thanks to your answers.



Cheers
Title: Re: Using your machine as a truckmout
Post by: JandS on September 18, 2020, 07:50:50 pm
More than once I have had to park across the road to a property.
Title: Re: Using your machine as a truckmout
Post by: M.J.M on September 20, 2020, 08:16:30 pm
More than once I have had to park across the road to a property.



Do you use a ramp
Title: Re: Using your machine as a truckmout
Post by: David Ball on September 20, 2020, 08:43:35 pm
I have an airflex pro with a external magma and a vac pod I always use the 3 vacs no matter what. Very good drying times.    Anyway. I have never used it as a van mount how are you filling  the tank with a bucket or X hose.  Hose pipe. To customer. Garden tap. And what  security like   doors open and that
I've got a few 25 litre tanks, fill them with hot water, so can either drop in a hose to fill or if parking is a no go, pour into tank as not to heavy.
Title: Re: Using your machine as a truckmout
Post by: M.J.M on September 20, 2020, 08:47:25 pm
I have an airflex pro with a external magma and a vac pod I always use the 3 vacs no matter what. Very good drying times.    Anyway. I have never used it as a van mount how are you filling  the tank with a bucket or X hose.  Hose pipe. To customer. Garden tap. And what  security like   doors open and that
I've got a few 25 litre tanks, fill them with hot water, so can either drop in a hose to fill or if parking is a no go, pour into tank as not to heavy.
[/quote

Alright thanks
Title: Re: Using your machine as a truckmout
Post by: mjm on September 23, 2020, 08:07:49 pm
thanks very much  i did the job and just put the feed pipe from machine in 3    25lre barrels its a bit strange no noise from machine inside the house  customer was on phone right through the job    iam going to target away from terreced  houses so i can work in this way  more