Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: MAX Carpets on February 14, 2020, 08:43:38 am
-
Hi guys
Tried to start the machine yesterday, half way through the day
Turned the key and nothing, the pump was still running, but just klunk from the engine
I e put jump leads on, just in case and still the same
I spoke to prochem they said could be waste tank float valve, but surely it would still turn over? I’m guessing starter motor, but any advice would be greatly appreciated
I’m hoping not blower, any advice on how I can tell?
Thank you in advance
Justin
07833694016
-
Turn the blower by hand if you can get your hand to the shaft, or just rock it back & forth.
Bypass the electrics, put a nail in the positive jump lead and put power the starter, this will tell you if you have a faulty starter, but it sound like a bad connection.