Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: escorttdi on December 30, 2017, 08:47:15 am

Title: conections, fittings, hose, etc
Post by: escorttdi on December 30, 2017, 08:47:15 am
any body got a few pics of how they have set up from the tank to the pump to the reel?????
what they used for conecter out tank, what they have used for hose/pipe to pump (pic if poss)
how they have connected to pump (again pic if poss)
and finally the pump to reel... what connecter   (pic again)
   pics conecters fittings  sizes etc
Title: Re: conections, fittings, hose, etc
Post by: escorttdi on December 30, 2017, 02:00:28 pm
Quote from: escorttdi on December 30, 2017, 08:47:15 am
any body got a few pics of how they have set up from the tank to the pump to the reel?????
what they used for conecter out tank, what they have used for hose/pipe to pump (pic if poss)
how they have connected to pump (again pic if poss)
and finally the pump to reel... what connecter   (pic again)
   pics conecters fittings  sizes etc

anybody???????
Title: Re: conections, fittings, hose, etc
Post by: P @ F on December 30, 2017, 02:20:34 pm
There should be an outlet elbow on the tank , normal garden hose on that with a jubilee clip , this then to pump with jubilee clip , same out of pump which goes to hozelock fitting onto reel .
I assume no DI ?
Title: Re: conections, fittings, hose, etc
Post by: tom20001 on January 01, 2018, 11:08:04 pm
Quote from: escorttdi on December 30, 2017, 08:47:15 am
any body got a few pics of how they have set up from the tank to the pump to the reel?????
what they used for conecter out tank, what they have used for hose/pipe to pump (pic if poss)
how they have connected to pump (again pic if poss)
and finally the pump to reel... what connecter   (pic again)
   pics conecters fittings  sizes etc

Il post photos of mine in morning 👍
Title: Re: conections, fittings, hose, etc
Post by: escorttdi on January 02, 2018, 06:33:39 am
cheers tom
Title: Re: conections, fittings, hose, etc
Post by: tom20001 on January 08, 2018, 06:21:12 pm
(http://www.cleanitup.co.uk/smf/1515435561_IMAG1720.jpg)(http://www.cleanitup.co.uk/smf/1515435578_IMAG1722.jpg)(http://www.cleanitup.co.uk/smf/1515435601_IMAG1721.jpg)(http://www.cleanitup.co.uk/smf/1515435618_IMAG1723.jpg)

Sorry about delay changing over vans at mo but im sure you get the gist of it from photos 👍
Title: Re: conections, fittings, hose, etc
Post by: peekeclean on January 08, 2018, 08:42:04 pm
(http://www.cleanitup.co.uk/smf/1515443938_joe mob 01 18 194.jpg)(http://www.cleanitup.co.uk/smf/1515443961_joe mob 01 18 195.jpg)(http://www.cleanitup.co.uk/smf/1515443971_joe mob 01 18 196.jpg)(http://www.cleanitup.co.uk/smf/1515443985_joe mob 01 18 198.jpg)

hope these help iv used push fit connectors from gardiner poles for most of my pump to hose fitting. thanks joe
Title: Re: conections, fittings, hose, etc
Post by: johnny bravo on January 08, 2018, 10:53:07 pm
are these jg fittings leak free for the 1/2 inch garden hose,   been thinking of trying them, may be easier to set up for a 2 man set up.    then change back to 1 if needed
Title: Re: conections, fittings, hose, etc
Post by: peekeclean on January 09, 2018, 05:00:07 pm
ye jg fittings and i run 2 pumps off one 80ah battrey so im always running 1 pump and 2 when i need someone with me.
Title: Re: conections, fittings, hose, etc
Post by: johnny bravo on January 13, 2018, 02:10:02 pm
just seen you got them from gardiners  J G 1/2 inch fittings
Title: Re: conections, fittings, hose, etc
Post by: CleanClear on January 13, 2018, 03:55:20 pm
Just got rid of the hozelocks in mine and so far looks like a dry van. JG half inch to the pumps. JG 3/4 inch to the reel.
Title: Re: conections, fittings, hose, etc
Post by: johnny bravo on January 14, 2018, 11:48:05 am
jg to the reel hose,     do you not use a brass swivell on your reel for your pump hose ?  where is your jg  fitted onto your reel hose.
Title: Re: conections, fittings, hose, etc
Post by: CleanClear on January 14, 2018, 01:48:30 pm
No i don't need a brass swivel on mine. If you wanted to drop it down then you would just add on a standard 15mm push fit elbow.
(http://www.cleanitup.co.uk/smf/1515937594_Selection_999(824).jpg)(http://www.cleanitup.co.uk/smf/1515937614_Selection_999(825).jpg)

Not all the 3/4 inch fittings will go onto your hose reel, although the correct size the way the fitting sticks out you can't actually get them on your reel. If you stick to the one i showed you above that is fine. Spins great and no leaks either.