Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Ryan @ Transparent, Carlisle on April 23, 2010, 09:17:42 pm
-
any of you lads using the ergotec, i would reccomend using some unger clips to add support to the edges of the rubber
http://www.windowcleancentre.co.uk/productdetails.aspx?ProductID=297&SectionID=34
they are a bit of a bad head to fit in, but i've found them a very good addition over the past few days.
-
why ryan the ergo tec the blade cant move anyway. or does it work a bit like dog earing?
-
I still use my original brass squeegee, with Pulex rubber held in by brass clips ;D
-
the rubber is only stable in the middle, on the ergotec.
at the ends, the rubber has slight "flex" . the clips stop this ;D
try them, there only about £3 for 40
;D
-
I still use my original brass squeegee, with Pulex rubber held in by brass clips ;D
try the ergotec with ettore rubber..... you wont look back ;)
-
ergotec does not use plastic clips
-
ergotec does not use plastic clips
mine does
-
mines jus fine though
it wud cause serious injury to
any one else "as its too hot to handle" lol ;D ;D
-
the rubber is only stable in the middle, on the ergotec.
at the ends, the rubber has slight "flex" . the clips stop this ;D
try them, there only about £3 for 40
;D
i dog eared mine so no point as it achieves the same thing
-
tried them years ago, much better without.
daz