Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: the red carpet on August 13, 2005, 03:50:20 pm

Title: scrubba delux
Post by: the red carpet on August 13, 2005, 03:50:20 pm

hi there just wondered if anyone would be able to help me out on this?
ive brought 2 extracta scrubba delux's in the last week both are used and  both apear identicall howerer 1 is twice as loud as the other, is this normal?, or does it suggest a fault in one of them? they both appear to work ok but ive only had a little go and im new to this so dont really know wat to expect

Title: Re: scrubba delux
Post by: Glynn on August 13, 2005, 04:35:21 pm

The noise will be coming from the drive arm bearing either at the motor end or the off-set block end, change the bearings.

Title: Re: scrubba delux
Post by: the red carpet on August 13, 2005, 04:52:56 pm

cheers Glynn, would you say my best bets to take it back to extracta then or is it something simple that can be done elsewere?
do you know if alltec repair things like this as they are quite local to me,

Title: Re: scrubba delux
Post by: conallon on August 13, 2005, 05:30:19 pm

Dani
         get in touch with the other guy, explain that you bought one from me and the bearings on the one he sold you are on there last legs,

kind regards Conrad
       

Title: Re: scrubba delux
Post by: Glynn on August 13, 2005, 06:31:31 pm

Simple,
take the cover off
loosen the screws and remove the drive arm
place the drive arm over a socket thats slightly larger than the bearing
place a socket or a drift/tube etc on the outer of the bearing and tap it free
take the bearing to ANY bearing supplier and buy a new one
gently drift it into place
re assemble

job done it takes minutes.