Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: jon s on March 24, 2010, 08:03:05 am

Title: How do i fill my di bottle with the resin?
Post by: jon s on March 24, 2010, 08:03:05 am

just bought a di bottle and a bag of resin, opend the top but trying to pour the resin in is hard as the pipe that runs from the top to the bottom is in the way.  any ideas? ive made a makeshift funnel with paper

regards

Title: Re: How do i fill my di bottle with the resin?
Post by: Sunshine/Cleaning on March 24, 2010, 08:27:44 am

Wash a plastic milk carton and then cut it in half, hold it by the handle and scoop the resin and tap it out of the small opening at the top.

Title: Re: How do i fill my di bottle with the resin?
Post by: mikeyfaerosyth on March 27, 2010, 07:39:43 pm

fill with resin.attach hose to di head.water presuyere will allow  riser tube to sink to bottom

Title: Re: How do i fill my di bottle with the resin?
Post by: mikeyfaerosyth on March 27, 2010, 08:11:44 pm

this  my ad vice only.bit pished

Title: Re: How do i fill my di bottle with the resin?
Post by: MoemGorod on March 27, 2010, 09:12:30 pm

Hi mate.

Start from this video at http://www.brodexbms.co.uk/index.php/machine_maintenance/resin_changing_video/

regards,

Vadim

Title: Re: How do i fill my di bottle with the resin?
Post by: jefftemperley on March 27, 2010, 10:53:07 pm

i use a gutter hopper it fits perfect

Title: Re: How do i fill my di bottle with the resin?
Post by: barry mallett on March 27, 2010, 11:09:05 pm

use a straw from mcdonalds

Title: Re: How do i fill my di bottle with the resin?
Post by: ♠Winp®oClean♠ on March 28, 2010, 09:59:46 am

Quote from: jon s on March 24, 2010, 08:03:05 am

just bought a di bottle and a bag of resin, opend the top but trying to pour the resin in is hard as the pipe that runs from the top to the bottom is in the way.  any ideas? ive made a makeshift funnel with paper

regards

Your riser tube has come away from the vessel head, this is ok, they just push-fit together. So, take the tube out of the vessel & push it back into the head.

Fill the vessel approx 4/5 with resin, then fill it with water (with the head still off). Put the tube & head (fixed together) back into the vessel, centre it & screw it down.

WARNING------ Be very careful not to cross-thread the vessel head, it may take several attempts to get the head & tube centered. I've been doing it 6 years & it still takes me a few tries!! ;D

Title: Re: How do i fill my di bottle with the resin?
Post by: jon s on March 28, 2010, 10:32:17 am

thanks for your replys. my first bag of resin is in the vessel  ;D

Title: Re: How do i fill my di bottle with the resin?
Post by: Llaaww on March 28, 2010, 06:26:08 pm

gutter hopper sounds like a good idea, I must get one of those.  :)