Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Visual Architect on February 22, 2010, 10:13:43 am

Title: TDS 7/8
Post by: Visual Architect on February 22, 2010, 10:13:43 am

Can i still clean windows with a TDS 7/8

If not which Filter do i need to replace

cheers

VA

Title: Re: TDS 7/8
Post by: paul rulton on February 22, 2010, 10:49:40 am

i was told it would b ok ??? i guess it depends on where u live ie hard water.
im sure both me & u r about 2learn something with the question u have asked.
personaly im gonna change my filters as soon as it gets around the 2/3 mk ::)

Title: Re: TDS 7/8
Post by: MoemGorod on February 22, 2010, 11:10:11 am

Quote from: Visual Architect on February 22, 2010, 10:13:43 am

Can i still clean windows with a TDS 7/8

If not which Filter do i need to replace

cheers

VA

Hi mate. No, you could not clean windows with a TDS 7/8 and you need to change DI resin.

regards,

Vadim

Title: Re: TDS 7/8
Post by: paul rulton on February 22, 2010, 11:16:18 am

 ;D lol told ya, love this form :-*
that vadim is the brain of brains :o he should go on master mind or the kripton factor ;D

Title: Re: TDS 7/8
Post by: MoemGorod on February 22, 2010, 11:21:05 am

Hi hitman,

You meen The Krypton Factor?

Vadim

Title: Re: TDS 7/8
Post by: paul rulton on February 22, 2010, 12:16:19 pm

Quote from: MoemGorod on February 22, 2010, 11:21:05 am

Hi hitman,

You meen The Krypton Factor?

Vadim

lol didnt think that looked rite ::) it true tho vadim. i just wish i could know only half wot u know ::)
good on ya m8 :D

Title: Re: TDS 7/8
Post by: R W C™ on February 22, 2010, 02:27:00 pm

Pure water window cleaning, not almost pure water window cleaning  ;)

Title: Re: TDS 7/8
Post by: Sapphire Window Cleaning on February 22, 2010, 02:29:35 pm

TDS of 7-8 isnt the end of the world, I have cleaned with water 010 on the TDS meter, and it left no spots, also I read somwhere that water with a TDS below 020 is ok to clean, as any spots left from this water would be invisible to the naked eye.
Like Vadim said I would look at you DI vessel and not your filters.




Matt

Title: Re: TDS 7/8
Post by: actualcleaning on February 22, 2010, 04:23:55 pm

My Tds regulary runs up to 009 ppm and is still fine for cleaning.Above this i am not so sure as i will change it when it gets that high.I have calculated that i get another 2 weeks use by running up to 009 ppm rather than changing as soon as it goes above zero,and as long as it is still cleaning without spotting that is ok with me.

Title: Re: TDS 7/8
Post by: MNWC on February 22, 2010, 04:28:38 pm

As a rule anything below 10 is ok

Title: Re: TDS 7/8
Post by: matt on February 22, 2010, 05:31:07 pm

010 is fine

i have cleaned in the 40 - 50's by mistake in the past and not had any complaints

my RO works at 006 - 007 without DI, i have come to the conclusion that the DI isnt really needed

Title: Re: TDS 7/8
Post by: A & J Owen Window Cleaning on February 22, 2010, 05:48:03 pm

have cleaned withtds of 25 and 40 it was fine

Title: Re: TDS 7/8
Post by: Jason Criddle on February 22, 2010, 08:08:53 pm

Many thanks for all your comments.

Cheers

VA

Title: Re: TDS 7/8
Post by: tacky on February 22, 2010, 08:20:07 pm

usually chuck my resin away at 5 .what am i .( a d ..k head )

Title: Re: TDS 7/8
Post by: niceandclean on February 22, 2010, 08:24:11 pm

Im sitting at 7 at the mo, will change the resin in around 2-3 months when i change the pre filters. I have cleaned at 15 with no problems.

Title: Re: TDS 7/8
Post by: paul saunders on February 22, 2010, 08:39:04 pm

I'm lucky, I get three zero's without resin. ;D