Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: brianbarber on February 20, 2010, 07:53:50 pm

Title: Pure freedom water flow rate setting
Post by: brianbarber on February 20, 2010, 07:53:50 pm

hi guys

just out of curiosity i have a new pure freedom digital controller, which runs from 1 to 99.
I currently use either 25 or 30 depending on job.
does anyone clean with a higher flow rate of say 35 or 40 ?

regards

Mr B

Title: Re: Digital Pure freedom water flow rate setting
Post by: windymiller on February 20, 2010, 08:01:12 pm

It all depends on your pump psi/flow rate.
I have same digital controller and it is set at 61 which gives me a flow rate of  1.7 litres a min. My pump is from john hewitt and have no problems with it.

Title: Re: Pure freedom water flow rate setting
Post by: MikeyL on February 21, 2010, 05:26:09 pm

I have got the same controller as well and I run mine at 20 seems to work fine.

Title: Re: Pure freedom water flow rate setting
Post by: krave on February 21, 2010, 05:41:28 pm

I use the Eco flo Which goes from 1 - 99. I use a Flojet pump 100psi .

I have it on 35 for maintenance cleans. Was wondering if its too high?

Title: Re: Pure freedom water flow rate setting
Post by: t8ycs on February 21, 2010, 09:09:39 pm

i have the pure freedom and i run mine on 12 to 15