Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: gewindows on February 09, 2010, 10:08:50 pm

Title: L5
Post by: gewindows on February 09, 2010, 10:08:50 pm

Can someone with an L5 please tell me if this is how the washer goes on the gas connection to the L5 heater please.

(http://www.acsforums.com/forum/public_html/yabbfiles/Attachments/ring.jpg)

Below the washer is the female nut and above the washer is the male thread. In this pic they are both screwed together as I would hope to be using it.

If it isnt correct then could someone please tell me what size washer I will need.


Thanks in advance.

Matt

Title: Re: L5
Post by: martindrz400 on February 09, 2010, 10:21:24 pm

looks wrong to me, have you cut the usa gas regulator off  as it dosnt fit calor bottles

Title: Re: L5
Post by: gewindows on February 09, 2010, 10:23:30 pm

I havent touched anything yet, the connection shown are the ones that arrived.

Title: Re: L5
Post by: martindrz400 on February 09, 2010, 10:34:20 pm

the regulator end is usa spec cut off and fit with a red propane reulator and the other end fits to the l5

Title: Re: L5
Post by: martindrz400 on February 09, 2010, 10:35:49 pm

if you have any problems give me a ring 07951255980

Title: Re: L5
Post by: gewindows on February 09, 2010, 10:38:10 pm

Cheers, I may do that, I was really just concerned about the placement of the washer for now, is it meant to be where it is in the picture, sandwiched between the male and female parts of the gas-pipe coupling?

The reason I ask is because I THINK I am missing a washer so I have robbed one of another piece of kit at home, so have I put it all together correctly?