Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Shaun_Ashmore on January 11, 2010, 08:48:45 pm

Title: CFR jets
Post by: Shaun_Ashmore on January 11, 2010, 08:48:45 pm

Anyone know what sized jet a 5 inch cfr tool uses?

Shaun

Title: Re: CFR jets
Post by: paul moss on January 11, 2010, 09:14:38 pm

Shaun there all interchangable. 1 to 5 guage dependant on the flush/flow you want.You can get them with different degree angles too for the 5 and 7 inch heads.

Title: Re: CFR jets
Post by: Shaun_Ashmore on January 11, 2010, 09:36:11 pm

It's the degree that I'm after.

Shaun

Title: Re: CFR jets
Post by: paul moss on January 11, 2010, 09:37:39 pm

In English or maths  :)

Title: Re: CFR jets
Post by: Stu.Clem on January 11, 2010, 10:09:17 pm

65 and 80 shaun i have about 5 diff ones the wider the tool the larger the degree  usually use  65 no2 or 3  in my 3 & 5" not used the no4 yet as hole looks huge...


Stu

Title: Re: CFR jets
Post by: stevie wonder on January 12, 2010, 07:31:32 am

Go to amtechs parts page and you will find them all colour coded
Stevie

Title: Re: CFR jets
Post by: colin fitch on January 12, 2010, 01:37:02 pm

Yes degree you are after is 95.

9501-9504 available.

colin.

Title: Re: CFR jets
Post by: Shaun_Ashmore on January 12, 2010, 04:08:23 pm

Thanks Col

Shaun