Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Rcs on December 27, 2009, 10:08:57 am
-
looking at setting up a pure water system
a resin system or ro
im in a hard water area west sussex
what is best
also i have no water meter
looking at setting it up in the shed
-
a resin only system will cost a bit ::)
you need ro and resin to finish
-
RO & the di to polish it off. With DI only you would get through bags of the stuff and at £60+ a pop it's not cheap.
Simon.
-
Hard water area its gotta be RO then polish off with DI.
If you DI only you will go through bags of the stuff
-
will need a small set up in that case if anyones got one going cheap
-
Rcs.... When you say a small set up... Are you doing tops only ? Just a little wfp ? Above connys ?
Tell us what you want to be able to do and we can point you in the right direction
-
yes tops only
just purchased a backpack
-
was only going to use backpack with difficult to reach windows
but im finding im using on most tops now
-
Quite a few use it for tops an leaded.
If i was you i would grab a 200gpd ro with single or double di, 2x200L water butts for storage and about 10 25L containers.
Check the for sale section on CIU or ebay
-
Two places to look in Red diving on e bay or Filtration online on Web both good prices. I bought from Water filtration online a 200 gal.for 130 quid but have just added a booster pump at 41 quid extra fron Red diving.all works well.
-
why do you use double di tanks
isnt 1 sufficient