Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Martin S on December 21, 2009, 08:14:38 pm

Title: Dri-Eaz TM
Post by: Martin S on December 21, 2009, 08:14:38 pm

Anyone seen these, marketed by Dri-eaz in Newport Pagnell?

http://www.sapphirescientific.com/Content_003.aspx?cid=1194

Title: Re: Dri-Eaz TM
Post by: Dennis on December 21, 2009, 08:37:07 pm

I don't know much about them except they put one in a Transit Connect.
Didn't know they were being distributed over here, another one to put on my short list.  ::)  :D

Title: Re: Dri-Eaz TM
Post by: brianbarber on December 21, 2009, 11:12:54 pm

Just thought mention the connect is the American version!!

Mr B

Title: Re: Dri-Eaz TM
Post by: Shaun_Ashmore on December 26, 2009, 08:46:00 pm

Wouldn't mind knowing some dimenions, looks slimmer than the solutions one, if memory serves me right the woodbridge machines are slim though.

Shaun

Title: Re: Dri-Eaz TM
Post by: Dennis on December 26, 2009, 09:37:33 pm

Console dimensions (W × H × D)       16 × 34 × 40 in. | 40.5 × 86.4 × 101.6 cm

Title: Re: Dri-Eaz TM
Post by: Shaun_Ashmore on December 26, 2009, 09:48:15 pm

Where did you find that Dennis?

Shaun

Title: Re: Dri-Eaz TM
Post by: Dennis on December 26, 2009, 09:54:54 pm

Click on Martin's link, then the Specs tab.

http://www.youtube.com/watch?v=Vm7zlrd2DVk

Title: Re: Dri-Eaz TM
Post by: Shaun_Ashmore on December 26, 2009, 10:16:20 pm

I can't find Martin's link, must be blind or thick.

Shaun

Title: Re: Dri-Eaz TM
Post by: Dennis on December 27, 2009, 08:21:44 am

or both  :o ;D ;)

http://www.sapphirescientific.com/Content_003.aspx?cid=1194

Title: Re: Dri-Eaz TM
Post by: Mike Halliday on December 27, 2009, 08:43:43 am

I rang up dri-eaz for some information on the Stryker wand which is shown with their new truckmount, they told me that Prochem would be the UK distributor so i should call them, but he said he had 2 in stock and quoted me £595.00 & vat &PP

Title: Re: Dri-Eaz TM
Post by: Karl Wildey on December 27, 2009, 10:35:08 am

I was looking at this wand as well, nice looking thing and very like, but any feedback?

anyone got one?

Title: Re: Dri-Eaz TM
Post by: Shaun_Ashmore on December 27, 2009, 11:18:32 am

Be nice to know about heat also where's the water coming from? I bet you could put one of these in a Nivara or simular putting it onto a clean water tank.

Shaun

Title: Re: Dri-Eaz TM
Post by: JandS on December 27, 2009, 11:29:14 am

That Vortex is one big machine.
3 wands at once or 12 upholstery tools.
£65 grand roughly don't seem bad.

John

Title: Re: Dri-Eaz TM
Post by: Nigel_W on December 28, 2009, 11:07:11 am

One of the big benefits of the Sapphire Scientific machines is that not only are they small but they don't dump any hot water. Perfect for smaller UK vans.

Nigel

Title: Re: Dri-Eaz TM
Post by: Shaun_Ashmore on December 28, 2009, 07:03:39 pm

Anyone know how much?

Shaun

Title: Re: Dri-Eaz TM
Post by: richie on December 28, 2009, 07:55:51 pm

Would certainly be interesting to see how they perform in the real world up against like for like from the likes of HM, Prochem, Woodbridge, Powerclean.

Richie.

Title: Re: Dri-Eaz TM
Post by: tom123 on December 29, 2009, 12:45:13 pm

Just so happened to be in Newport Pagnell at Dri eaz when they were taking there first demo of this little beauty. They have theres in the back of a vito, but assured everyone it would fit comfortably in a Connect type or similar.
Very impressive piece of kit, liked the wand they were using aswell.
They had an interesting designed water tank aswell, kind of sat in an L shape with the hose reel sat in it(hard to explain)
Im not sure on price, i thought i heard 10k mentioned, but not sure how accurate that was?