Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: wezzy32 on December 04, 2009, 11:12:28 pm

Title: problem with ro-man unit
Post by: wezzy32 on December 04, 2009, 11:12:28 pm

i have taken a pic of set up in my shed.the problem i have is the resin unit on the left does not fill up iv tryed it at the same height as main unit and now i have put it lower but it seems not to fill up any ideas. ? it still produces water and my reading is 2 but i have had it at 0.so the water is going thro the unit but the cardrige isnt filling up  ???

Title: Re: problem with ro-man unit
Post by: Gleaming windows on December 05, 2009, 12:27:12 am

Try filling it with water before you reinstall it on the unit.

Title: Re: problem with ro-man unit
Post by: eclipse on December 05, 2009, 12:31:58 am

1 have you put the catridge in upside down? easy done
2 is the unit set on flush?
3 any cellopane or dust covers on the actual catridge?

Title: Re: problem with ro-man unit
Post by: Craig 72 on December 05, 2009, 07:41:51 am

What does your pressure gauge say?

Title: Re: problem with ro-man unit
Post by: lee_dewing on December 05, 2009, 09:36:03 am

i think eclipse has answered, i bet cartridge is wrong way up.

Title: Re: problem with ro-man unit
Post by: Ian Lancaster on December 05, 2009, 09:39:08 am

......or housing is connected the wrong way round (outlet pipe to inlet side and vice versa)

Title: Re: problem with ro-man unit
Post by: LWC on December 05, 2009, 09:40:59 am

Or in the past i have done a pre filter up too tight and it wouldnt let water through, try letting it off a little, could even be an air lock, slowly let it off with the water on and see if it runs.

Title: Re: problem with ro-man unit
Post by: lee_dewing on December 05, 2009, 09:45:59 am

let us know what it was wezzy ;)

Title: Re: problem with ro-man unit
Post by: wezzy32 on December 05, 2009, 01:39:53 pm

Quote from: Matt Bateman on December 05, 2009, 12:27:12 am

Try filling it with water before you reinstall it on the unit.

filled unit b4 re installing and so fare so good.wil keep u all posted

Title: Re: problem with ro-man unit
Post by: wezzy32 on December 05, 2009, 02:30:11 pm

still running at 2 but last unit full off water