Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: kinder clean on November 25, 2009, 10:38:36 pm
-
Ive been to look at a commercial job today, over 300 sq/mtr.
The entrance reception, corridors and stairs all have black greasy oil contamination from employees taking a short cut to the workshop (its a metal fabrication engineering company)
The carpet (not tiles) is a blue nylon heavy duty contract carpet I think its known as baltic, it has a thin rubber backing.
A - Have you guys had posiitve results on similar ?
B - What would your approach / products of choice be ?
Many thanks
Paul
-
Hot ultrapak buffed in and hwe turbo dry to avoid any wicking, need to go over areas twice.
Shaun
-
Don't expect the traffic lanes to clean up brilliantly. If the pile is very crushed, it's a sign the carpet is a significant age and therefore problem has been evident for a very long time. You just can't clean it how you want to and it'll frustrate you!
Don't be tempted by solvent boosters, they'll probably cause more problems than they solve.
You run a porty if i remember right Paul? Totally do-able but hope you've got an energetic helper if you do all that in one day! I'd get a good night's sleep beforehand yourself too!
-
Thanks Shaun / Jim
On my own Jim ! :'(
Yes using a powerflite porty, might split job over 2 nights. ( or 3 or 4 or 5 or 6 ;D )
Thanks
Paul
-
got to disagree with jim. when i do greasy com carpets i mix up some greasebreaker with hot water and pre spray, agitate til it starts to break up the grease then powerburst with some more greasebreaker, agitate then acidic rinse.
corridors with kitchens and trolleys are caked in it.
ps i rinse at 500psi hot, and follow up with a buffer.
derek
ps....not saying jims wrong, just saying what i would do.
-
I was just highlighting the dangers of bitumen backed carpet tiles and solvents ;)
-
greasebreaker and citra boost have no effects on bituman backed carpet tiles, none whatsoever. try it on a spare one, poor some on, leave over night and then rince under tap, nothing nowt, nil
then try it with OJ. aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaarrrrrrrrrrrrrrrrrrrrgggggggggggggghhhhhhhhhhhhhhhhhh
derek
-
Paul,
give me a ring, not some thing i would put on these boards,
I would get shot at dawn ;) ;D
geoff
-
honestly not being pedantic but... rinse unde ra tap is very different from HWE at TM temperatures!!
Obviously you have worked out a way to do that safely and I'm not calling you a liar, just drawing on my own experiences :)
-
Geoff... not the dynamite method is it?!! :-X
-
honestly not being pedantic but... rinse unde ra tap is very different from HWE at TM temperatures!!
Obviously you have worked out a way to do that safely and I'm not calling you a liar, just drawing on my own experiences :)
okay
poor greasebreaker onto a bit back carpet, scrub it in, then use your truckmount at the highest temp to extract it out and it will have no effect on the bituman whatso ever, nil nothing newt. now your just looking for excuses gym.
ive even taken the fibre off a bit back and scrubbed greasebreaker and citrus boost on to the tar and no transfer what so ever. try it then come back and let me gloat. ;D
derek
-
As once said by Dave Ingram...........Pour petrol onto the carpet then light it. As soon as you can smell the poly prop or wool burning hit it with the HWE.... ;D
Richie.
-
GEOFF I know don't I ;) ;) ;)
-
Just read your message Geoff, I'll give you a ring tomorrow.
Cheers
Paul
-
Yes you do tony ;)
but been a yorkshiremen , we do tend to know most things ;D
:-X :-X :-X geoff