Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: brianbarber on November 22, 2009, 08:02:24 pm
-
Hi guys
is it a company called amtech who sell these in this country?
regards
Mr B
-
Hi brian
The company that sells them here is called restormate..
-
Many thanks
Mr B
-
Brian
As Clinton says - Restormate are the importer/dealer for the Prowler.
Perhaps you mixed up cause Amtex are the manufacturers in the USA, and the name sounds a bit like a company down south that deals with the Powerflites - Amtech.
-
Some new videos on Youtube of the 20hp Lioness rrroooooaaaaaaarrrrrrr you may be interested in. ;D
http://www.youtube.com/user/amtexequipment#p/a/u/2/62EpoUNZV10
Added later: I see the new ones have a bracket to winch it into the van. Great idea I hope I get some commission. ;D
http://www.cleanitup.co.uk/smf/index.php?topic=76632.msg672889#msg672889
-
Good video dennis :)
-
Looks like its going to do the business.
Very compact for a 20hp machine.
-
Anyone know, how much the 20hp machine will be?
-
Give JK a ring tomorrow.
-
Joe are these the next generation of prowlers with the larger engines ???
Think yours is 15 bhp ???
cheers
-
i have the 13hp 1000psi for carpets only,not doing hard floors, dont know what advantage more psi would do me or larger engine size. i run 150ft of hose from it no problem. No room in van for any more hose anyway.
Having said that i would love the lioness!
Joe do you think you use the extra power of the 15hp and 2000 psi?
I think the 13hp is a great value machine and would be interested to see how much extra the larger capacity machines are and if pro rata there is much to gain.
-
I have been told that they 20hp is not worth the extra 2500 quid if only being used for carpets.
-
Andrew
If my 15hp was not available 2nd hand with just 22 hours on the clock, I would have gone for the 13hp machine (I would just have to had saved up a bit more).
I have had a go with Dave Powers 13hp and reckon its more then adequate for what majority of us use it for - average 75 foot runs, but will do up to 300' (never been more then 175' and that was one big house!
The new 13hp has 2000psi as standard.
-
didnt like the idea of the lioness' new 2500 pump having a max working temp of only 140 degrees - then saves itself by bypassing. That will put me off from "uprgading" in the future or I may have misunderstood. Cant see many jobs where my 09 390 1000psi wont cut the mustard - I got 200ft with mine and cant tell any diff from 50ft. Also reckon using the same heat exchanger at the new higher flow rate will def = lower available heat output at wand....
Looks very very nice tho :P
I love prowlers me!!!
Stu