Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: garyhumphreys on November 16, 2009, 03:31:21 pm
-
I am now on my 3rd set of remotes bought fron b&q. £19.99 for three, rated 13 amps but they keep braking down and wont switch on after a while. Anyone had the same problem? Anyone bought theirs from somewhere else and had no probs.
Gary
-
Have not used mine yet ::)
Maybe joe can tell you more as he has some and uses them..
Mine took me ages to pair up with the main switch :(
-
Only used mine twice so far - probably the third time on Wednesday.
Perhaps too soon to tell, but no problem so far.
-
Ive used mine on 4 jobs on the 2nd and 4th job i tripped the lecky wont be using them again on my powerflight 2vacs and a pump run of one lead.
-
Had no probs tripping leccie. Using Air flex turbo with 2 leads one powering pump and 3rd vac and other powering vac1 and 2.
-
Gary,
Been using these for years one plug for the Bane Clene machine and one for the Ashby Steamate. Are you sure the one you have is the 3 kilowatt version?
Regards, Martin.
-
Your right could be the wrong one as i saw other packs for sale too ???
-
Taking them back tomoz. Probably best to upgrade eh? :-\
-
Used mine about 20 times in total and not had a problem and these are connected to a scorpian. Absolute Godsend when you're on the 3rd floor and need to change the tools.
-
I too have trouble switching off. Will switch on anywhere but not back off. Have a standard 135psi steempro nearly new,think the problem is that as it runs off one cable at the remote it is close to the plugs limit