Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Martin ccs on November 05, 2009, 04:40:17 pm

Title: diy set up for peugot partner 2001.
Post by: Martin ccs on November 05, 2009, 04:40:17 pm

in the middle of a diy set up and just wanted to see if anyone else has the same van and how they went about the set up.

fitting tank?

ripping ply out and painting?

stopping kit from flying round the van on the move?

Title: Re: diy set up for peugot partner 2001.
Post by: stfc on November 05, 2009, 06:44:18 pm

got exact same van,with diy water fed pole,email me at markswindowclean@hotmail.co.uk and will tell you what i have.

Title: Re: diy set up for peugot partner 2001.
Post by: Martin ccs on November 05, 2009, 08:36:06 pm

Quote from: stfc on November 05, 2009, 06:44:18 pm

got exact same van,with diy water fed pole,email me at markswindowclean@hotmail.co.uk and will tell you what i have.

yeah cheers mate.

email sent

nice one

Title: Re: diy set up for peugot partner 2001.
Post by: MNWC on November 05, 2009, 08:55:54 pm

ive got a pug on 04 plate

400 litre  upright tank sitting in a tray bolted through the floor and then 2, 2 tonne ratchet straps holding it down

100m minibore

1 18ft, 1 5ft poles in the back

1 35ft pole in poleholder on roof rack

leisure batt.

Varistream

Full trad gear + ladders and steps

Title: Re: diy set up for peugot partner 2001.
Post by: paul04 on November 05, 2009, 09:21:35 pm

Quote from: Martin ccs on November 05, 2009, 04:40:17 pm

in the middle of a diy set up and just wanted to see if anyone else has the same van and how they went about the set up.

fitting tank?

ripping ply out and painting?

stopping kit from flying round the van on the move?

ive got the same van 2001 as well   i carry a 250l diy system ratchet strapped to 2 pieces of steel angles that are bolted to the floor.   i also carry 8 x 25l  containers 

p.s
on monday my timming belt snapped and the thing with the parnters is  ,the whole engine goes so ive had to order a new engine    400 quid  plus labour (between 150- 200 quid extra)
so something to look out for.       but the good thing about carrying 25l barrels,     i made a trolley system from the diy kit for about 50 quid  so i can work from a car until the vans sorted.

hope my rambling helps u get prepared
pj

Title: Re: diy set up for peugot partner 2001.
Post by: dazmond on November 05, 2009, 10:22:58 pm

sounds a lot  of gear in a small van marcus!i would watch that suspension if i were u!im thinking of a combo with 300 lt tank and trad gear in with a backpack.

Title: Re: diy set up for peugot partner 2001.
Post by: sgibsoncleaning on November 05, 2009, 10:26:54 pm

sounds a lot if its only a 600 payload one. mines an o2 plate and i have a 250 flat tank. time you get all your other gear in i think i am getting towards the limit

Title: Re: diy set up for peugot partner 2001.
Post by: MNWC on November 06, 2009, 08:00:13 am

Plus 2 blokes and lunchboxes and flasks  :P

Title: Re: diy set up for peugot partner 2001.
Post by: Martin ccs on November 06, 2009, 01:55:27 pm

Quote from: Marcus Norton on November 05, 2009, 08:55:54 pm

ive got a pug on 04 plate

400 litre  upright tank sitting in a tray bolted through the floor and then 2, 2 tonne ratchet straps holding it down

100m minibore

1 18ft, 1 5ft poles in the back

1 35ft pole in poleholder on roof rack

leisure batt.

Varistream

Full trad gear + ladders and steps

hi thanks for your info.

how did you fix your tank in van? (wanting to do the same as yours) took mine to a local garage and they said its not as easy as it looks cuz the fuel tank runs along the whole right hand side.

a pic would be great! ;D

Title: Re: diy set up for peugot partner 2001.
Post by: TCs window cleaners on November 07, 2009, 09:09:11 am

hi marcus do you have picture of your tray as i was thinking of the same idea thanks