Clean It Up
UK General Cleaning Forum => General Cleaning Forum => Topic started by: Daria Taylor on October 25, 2009, 12:05:42 am
-
hey guys can someone suggest a good one? I mean a very effective professional oven cleaner to remove tough grime and dirt from very very dirty ovens. stuff like professional oven cleaners use and where i can get it from.
Thanks,
Dash
-
The best I have used is "Mistral Carbonoff"
Ebay 330329842617
-
The best I have used is "Mistral Carbonoff"
Ebay 330329842617
Thanks Colin,
I will have a look.
-
It's the 5 litre bottles of it that I use, dunno if this spray's the same stuff so get in touch and ask them first before you buy.
The stuff I use is gloopy and I paint it on and leave it while I dip tank the rest of the oven bits and bobs!
-
It's the 5 litre bottles of it that I use, dunno if this spray's the same stuff so get in touch and ask them first before you buy.
The stuff I use is gloopy and I paint it on and leave it while I dip tank the rest of the oven bits and bobs!
Do you mean you use Mistral Carbonoff too?sorry bit confused ???
-
That stuff is good but caustic
Make sure you are wearing PPE when you use it
-
Yes, Mistral Carbonoff.... It is caustic asBill has said and hurts like hell if you get it in your eye, it's not quite as nasty as Vanquish though (Ouch) :'(
I use Brillo degreaser first and caustic only if needs must and I always ask the customer if they're happy for me to use it.... I've yet to meet anyone that has said no :)
-
You are dead right Dry nets - Mistral carbon off is the stuff to use for really bad ovens , i still have the scars to prove it
-
Gauntlets are a must, along with eye protection 8)!
-
Hi Dry Nets
Where did you get your dip tank?
Dan
-
Daniel
Got ours 2nd hand off ebay, cost us £600 and worth every penny i can tell you .
-
Hi Cleato
I look on there all the time. Thinking of having one made. Could you post some pics so I have got a place to start designing from?
Thanks
Dan
-
I've actually got plans for one to be made, produced, tested and then reproduced. I need enough interest to get the prototype made and put the money in.
Anyone interested in becoming a business angel?