Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: stfc on October 10, 2009, 08:37:10 am

Title: bit confused
Post by: stfc on October 10, 2009, 08:37:10 am

just got an ro unit last night,never seen 1 before if im being honest,do i need any connections?reason i say it is that the pipes in thickness are rather small to connect to a mains tap.below is a link of the picture of it,this link should work

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=280402715582&ssPageName=STRK:MEWAX:IT


many thanks if theres any connectors you think i need could you tell me where from  thanks in advance

Title: Re: bit confused
Post by: Window Washers on October 10, 2009, 08:39:16 am

reducer will either be supplied or needed

Title: Re: bit confused
Post by: Sapphire Window Cleaning on October 10, 2009, 08:56:16 am

you shouldn't need any converter as the inlet to the pre filters should have a John Guest 1/2 inch connector, if you haven't got one then try Alex at Gardiner products or Craig at polarbrite.
I am assuming that its the inlet to the RO you are talking about.




Matt

Title: Re: bit confused
Post by: stfc on October 10, 2009, 09:19:24 am

yes it is and no connectors come with it unfortntley but was cheap enough so dont mind.

Title: Re: bit confused
Post by: Sapphire Window Cleaning on October 10, 2009, 09:33:16 am

where are you based?




Matt

Title: Re: bit confused
Post by: stfc on October 10, 2009, 01:07:23 pm

in shrewsbury

Title: Re: bit confused
Post by: Ian W on October 10, 2009, 06:16:57 pm

I think this is what you probably need. I hope this helps.  :)

http://cgi.ebay.co.uk/Water-Filter-RO-Inlet-Tap-Connector-Push-Fit-3-4-1-4_W0QQitemZ380115033411QQcmdZViewItemQQptZUK_HGKitchen_SmallApp_RL?hash=item58809f1d43&_trksid=p3286.c0.m14#ht_893wt_960