Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: ccmids on September 28, 2009, 05:05:52 pm

Title: 2 water pumps
Post by: ccmids on September 28, 2009, 05:05:52 pm

is it possible to use two water pumps for one system , i have a spair pump and was thinking of fitting it on my system to give more presure at the brush so it blasts out .

Title: Re: 2 water pumps
Post by: tomy jackson on September 28, 2009, 05:10:55 pm

it will only be as powerfull as the pump with hiest psi if in line , and volume

Title: Re: 2 water pumps
Post by: windowashing on September 28, 2009, 05:19:43 pm

you can increase the pressure of one pump by adjusting the screw inside.

this will only alter the cut off pressure though,giving you a blast when you first open the pole tap.

just get smaller jets fitted!!!!!

2mm jets will make rinsing much more efficient withoout wasting all that precious water!!!!

Title: Re: 2 water pumps
Post by: ccmids on September 28, 2009, 05:47:58 pm

ive got 100 psi fitted if i add another, wont this make it 200 psi.