Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Pristine Clean on July 26, 2009, 05:48:12 am

Title: Descale A Porty
Post by: Pristine Clean on July 26, 2009, 05:48:12 am
I was reading a post by Derek West

http://www.cleanitup.co.uk/smf/index.php?topic=78366.0 PSI Probs

I know his is a TM but would you descale a portable carpet cleaner every now and then and what with?

Or is there now need too do it? It never crossed my mind until I read the post above.

Dave
Title: Re: Descale A Porty
Post by: Dennis on July 26, 2009, 09:00:46 am
I use Phos from my local supplier about once a month or so.

http://www.cloverchem.co.uk/uk/products/food_phos_uk.htm

Stick half litre Phos to 10 litres of water in the tank and recirculate through your solution hoses back to the tank, leave for half hour with the pump off then with the heaters full on recirculate for about an hour then connect up tools and run through them for a few minutes. Pump out and put loads of fresh water through to flush. You can use it a couple of times before you need new.

I live in a hard water area (and so do you in Kent I think) and really notice the difference after de-scaling.

It shines up wand heads lovely as well and is brilliant on kettles.  ;D
Title: Re: Descale A Porty
Post by: Pristine Clean on July 26, 2009, 09:25:51 am
Hi Dennis,

Many thanks for the tip and chemical to use. My supplier stocks Phos.

I will make sure I do this every so often. And yes we are in a hard water area.

Thanks

Dave
Title: Re: Descale A Porty
Post by: Jim_77 on August 25, 2009, 05:06:11 pm
Dennis how do you order Phos? There's no order button on the website!!

What does it cost roughly?
Title: Re: Descale A Porty
Post by: Dennis on August 25, 2009, 05:39:21 pm
Dennis how do you order Phos? There's no order button on the website!!

What does it cost roughly?

Get mine off the shelf from Hugh Crane, local supplier, £8 or £9 for 5l.