Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: concept on July 21, 2009, 06:21:16 pm
-
As you guys know, I am a total newb...my TDS is on the hike and I don't know how to pinpoint the problem, however, I have a fair idea...
System:
Pre-filter (new)
Merlin RO (bought 2nd hand, no idea of age)
DI Vessel (new)
TDS as follows:
Source: 335
After pre-filter: 328
After RO: 79
After DI: 18
I assume as all else is new, the RO unit needs its filters replacing?!
???
-
Resin prob wants changing. What size is DI? How long ago was it new resin?
-
about 4/5 weeks, and I only started producing a few weeks back...
-
What size is the DI vessel?
-
18"
-
i've never used a merlin but 78 after the ro sounds massivley high ???
-
Try flushing your RO for about 30 minutes with water. Might just need a good clean. if poss, flush it with the DI water in your tank
-
even though i have had a tds reading of 0 up til now?
-
possibly, yeah....You should rinse your RO out about once every 7-14 days. If you dont you will find that it doesnt work so well.
Think of your RO as a filter. It will filter out a lot of impurities but in time it will clog up so you need to clean it.
-
just buy new filters from gapswater for the merlin, just ordered some today for mine just found out you should change the carbon filter every 3 mths roughly and i havent been doing it
worth speaking to them they know there stuff
-
which ones the carbon filter??
will flush it 2moro and review.
cheers for the advice guys!
-
that said...how do i flush the merlin?!
-
Concept that tds reading after RO is pretty high mate, it wants to be less than 25 otherwise the resin will need changing a lot.
-
replace filters in ro then?
-
Sounds like you need a new membrane, if the pre filters are new but the membrane 2nd hand i'd look to that.
-
Hi Matt, hows the mini pole?!
-
Hi Craig yeah its very good, a lot lighter than the previous one mate.
Getting a larger van in the next couple of weeks.
Suppose you dont fit cages and tanks do you?
-
Concept I would give it a good flush for atleast 3 hours just to make sure, if its still the same then I would get new membrane.
-
I've got to be careful not to be seen peddling!! on here (like some suppliers do) so if you get a chance call me tomorrow.
As we can help on this.
-
Craig do you have msn?
-
i don't sorry, mind you i'm on my other half's apple mac (she's graphic designer its the tool!) so wouldn't no how to access it if i did! if you E-mail me so i have your e mail address on my work computer, as soon as i'm in the office in the morning i'll send you some info.
-
Ok mate, I'll nip in the office either tomorrow or Thursday mate.
-
I'm trying to persuade my GF to get me that pressure washer for my birthday present lol
-
Go the whole hog hint for gutter vak too!!!!
-
I'll try my best mate lol
I'll need a gennie for the gutter-vac too lol.