Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: geefree on July 18, 2009, 01:21:39 pm

Title: Sureflow pump right way?
Post by: geefree on July 18, 2009, 01:21:39 pm

Hi,

just re-doing the inside of the van... i was told a while ago that my pump is he wrong way up... with the inlets and outlets at the bottom...with the writing the normal way up...

is this upside down, and can anyone tell me why as it looks normal with the writing etc,..

and what difference would it make as it has always worked fine..

thanks for any advice.

 ;)

Title: Re: Sureflow pump right way?
Post by: Sapphire Window Cleaning on July 18, 2009, 01:32:54 pm

It doesn't matter whether its upside down or not just make sure the flow is going in the right direction.

Title: Re: Sureflow pump right way?
Post by: GWCS on July 18, 2009, 01:33:33 pm

the electronics (where the wires go into the unit) should technically be at the top to prevent short circuiting from water leaks.

HTH.

Title: Re: Sureflow pump right way?
Post by: Slash on July 18, 2009, 02:18:55 pm

My pumps were fitted with the Pure Freedom system and the inlet/outlets were at the bottom.

Title: Re: Sureflow pump right way?
Post by: geefree on July 18, 2009, 05:42:27 pm

Thanks Guys. ;)