Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: JSMC on June 22, 2009, 09:58:14 pm
-
can you give me the spec of yer vac system please. I know you have vac which was posed other week. What attachments do yuo have for ed of hose etc and did you diy the angle adjuster for positioning the top of the hose.
any pics?
-
110 or 240 v?
-
anyone? ???
-
anyone know where he is ?
-
I use this for my vac 3600w It may be possible to use less but you would need to seek advice from someone more qualified. Omnipole used to supply it last year for theirs. http://www.pump.co.uk/shop/Generators/PetrolSilent/d24/sd77?code=LC5000DDC
-
I use a 3600w with 50mm hose and 50mm gutter poles. I wouldnt use any less of each. When we first started we tried but it would be quicker to use a ladder with all the problems.
The vac at eastern trading would be suitable.
What setup did you have in mind?
-
where ye ge tyer 50mm poles from ?
ideally i would like that vac with decent generator and poles to clear debris but i would most likely go with attaching hose onto one of my pole up the outside and diy the clamp from on her eto position hose over gutter.
-
I had them made. They are Modular, there is no lips for any debris to catch on and they are bomb proof and very rigid but as they are aluminium they are fine up to about 25ft but after that they are a bit on the heavy side. We have used them up to 35ft.
-
how much did that cost ye mate? any pics ?
-
I had them made. They are Modular, there is no lips for any debris to catch on and they are bomb proof and very rigid but as they are aluminium they are fine up to about 25ft but after that they are a bit on the heavy side. We have used them up to 35ft.
where did you get them from ? and what was the cost ???
Ian
-
Yeah, details por favor 8)
-
I had them made. The work was about £100 the bits were about £100 I think, it was a while ago now. Sorry I cant put any pics at the moment up as the poles are where I store the gear and im at home, but I will put some up when I can. If I was gona do it all again though and I knew about the sl2 base sections I think I would have used them. (but upside down so the lips not a problem)
-
Sorry I forgot to mention they are aluminium and modular. :)
-
do the poles have to go in far when joining them together to make sure they keep a good strength
-
anyone else using poles they have made ? or using hos eon outside of pole
-
http://www.metals4u.co.uk/detail.asp?cat_id=22&prd_id=995
how would you go about making that into sections that slot together
-
this could work using those ali tubes i reckon
-
Turned aluminium sleaves with slots cut one end to enable a jubelie clip to fasten. The sleave is then aluminium welded to the end of one section leaving an overlap of about 2.5" for the next section to slot in. The trickey bit is making the sleave as it is not available in standard sizes.
-
this could work using those ali tubes i reckon
It does work but its time consuming to make.
-
how much for poles from omnipole already made?
-
Omnipole only give their prices out to serious customers who don't even want to know the costs apparently.
You can email them or phone.
Quote: "Serious enquirers always contact us by telephone or email for quotations.
The vast majority of our clients have no interest in the cost of the equipment, they just require to know whether it is suitable for particular locations and sites, orders for the equipment they require is then placed by the relivent purchassing departments."
http://www.cleaningspot.co.uk/cgi-bin/sh000002.pl?REFPAGE=http%3a%2f%2fwww%2ecleaningspot%2eco%2euk%2facatalog%2findex%2ehtml&WD=pole%20power&PN=Aircraft_alloy_water_fed_pole%2ehtml%23a50#a50
Any help?
-
Search for power poles on the net - other suppliers sell them too. Omnipole only give their prices out to serious customers who don't even want to know the costs apparently.
If you need to ask how much - you cant afford it :P
LOL
-
gwcs tell me more about yer set up?
yer vac is from eastern tradin yeah?
generator what type etc
-
gwcs tell me more about yer set up?
yer vac is from eastern tradin yeah?
generator what type etc
Vac from ET
Pole is 2nd hand Gardiners Base sections
Generator is http://www.pump.co.uk/shop/Generators/PetrolSilent/d24/sd77?code=LC5000DDC
other than that its exactly as the DIY build a Gutter Vac thread posted by Mr H about a year ago.
-
attachemtns for guttering? some ar enot easy to access due to slates tiles hanging ove rthem
details i need gwcs lol.
how is the vac ?
-
attachemtns for guttering? some ar enot easy to access due to slates tiles hanging ove rthem
details i need gwcs lol.
how is the vac ?
I use various reducing sections (obtainable from all good vacuum spares stockists) from 40 (i think its really 38mm) down to like 25mm, but at this size it clogs up extremely easy! Any overhangs are better left alone
-
Search for power poles on the net - other suppliers sell them too
Stockists of Genuine Omnipole PowerPoles are
Sureclean Systems
All Clean Services
Express Cleaning Supplies
All Clean and Sureclean also stock and supply Omni GutterVac equipment
Omnipole Systems Ltd
www.omni-guttervac.com
Product Number Name Description Price Per
Unit + VAT
Complete Professional
Gutter and high level
Exterior Cleaning and
Surveying System
FULL PACKAGEGutterVac System 48' reaches 52'-
OmniCam Survey system and 36' Gutter and High Level
Pressure washing System - Generator £4795.00
GutterVac with 50mm Hose supplied with commercial &
Domestic gutter cleaning heads
24/110GV GutterVac 24' 110 volt 4200 watt motors - 15 metres 50mm hose - 4 x 6' telescopic tubes £1,090.00
24/240GV GutterVac 24' 240 volt 4200 watt motors - 15 metres 50mm hose - 4 x 6' telescopic tubes £1,090.00
30/110GV GutterVac 30' 110 volt 4200watt motors - 15 metres 50mm hose - 5 x 6' telescopic tubes £1,140.00
30/240GV GutterVac 30' 240 volt 4200 watt motors - 15 metres 50mm hose - 5 x 6' telescopic tubes £1,140.00
36/110GV GutterVac 36 110 volt 4200 watt motors - 15 metres 50mm hose - 6 x 6' telescopic tubes £1,190.00
36/240GV GutterVac 36 240 volt 4200 watt motors - 15 metres 50mm hose - 6 x 6' telescopic tubes £1,190.00
42/110GV GutterVac 42 110 volt 4200 watt motors - 15 metres 50mm hose - 7 x 6' telescopic tubes £1,240.00
42/240GV GutterVac 42 240 volt 4200 watt motors - 15 metres 50mm hose - 7 x 6' telescopic tubes £1,240.00
48/110GV GutterVac 48 110 volt 4200 watt motors - 15 metres 50mm hose - 8 x 6' telescopic tubes £1,290.00
48/240GV GutterVac 48 240 volt 4200 watt motors - 15 metres 50mm hose - 8 x 6' telescopic tubes £1,290.00
Replacement hose per metre £8.57
Replacement hose
15 metre coil lightweight reinforced pvc only 0.43kg per metre -5 to+ 80C
recommended retail price £204.55 £120.00
AS/50/15 Anti static hose option 15 metres 50mm Anti Static Hose please add to system cost £220.00
24/support pole Support Pole for all 48' systems 24' pole to enable two operators to support the 48' systems £262.00
Cam system
Omn-Cam Survey System -
Various poles available at extra
cost
Supplied in padded aluminium flight case1/3" super sensitive
CCDcam,monitor/recorder,batteries,AV in/out
accessories,cable,cam mount,computor linking hardware £595.00
Gutter and High Level Pressure
Washing System - Complete high
level exterior deep cleaning
system, brick, stone,
cladding,graffiti,posters and
gutter high powered washing
system- includes standard low
level lance
3000 PSI 15 litre per minute Honda GX340 11HP Pressure Washer,low
speed interpump plunger pump with brass manifold driven via reduction
gearbox,unloader valve with pressure controler,10 metres hp hose,3 metre
suction hose,filter,chemical injection facility,gutter hook,straight
attachment,heavy duty two piece gun and lance for ground level cleaning,set
of quick connect jets,PowerPole,gutter spike.
24' telescopic PowerPole system as above £2,181.00
30' telescopic PowerPole system as above £2,231.00
36' telescopic PowerPole system as above £2,281.00
Whirlaway
Whirlaway flat surface Cleaners -
connects to pressure washer to clean
paving,drives,roads,paths etc. - cleans upto
20 square metres of paving etc.a minite
Special prices when purchased with the complete GutterVac system 16" 18"
or 20" versions
Generator Operate the Omnivac system without mains power
Step gen
Honda engined Generator with wheel kit -
This unit is heavily discounted the list
price being £1147.00 + wheel kit
Honda four stroke engines with oil alert / Noise compliant using the latest low noise engine
specification / Dual voltage output c/w overload protection / Fully welded industrial carry
frames for maximum strength / Brushless maintenance free Markon alternators with
exceptional component design quality / Rubber bushed control boxes for longevity of electrical
components Specifications OUTPUT: 6.0kVA / 4.8KW SOCKETS: BS4343 industrial
sockets -1 x 115V 16A sockets1 x 115V 32A sockets2 x 230V16AsocketsENGINE:HONDA
HP/CYLINDERS:11.0/1 START:RC FUEL TANK:6.5 litres RUN TIME:3.5 hours @ 75% Load
NOISE LEVEL:71dB (A) @ 7 metres. 97LWA SIZE:L690x W480 x H540mm WEIGHT: 59kg
£775.00
Gennie wheels Wheel Kit for Generator Wheel kit to enable generator to be transported £55.00
Omnipole 3 Hermitage Lane, London SE25 5HH, 020 8405 6782 Fax: 020 8405 6780 Web Site:
Gutter + High Level Surface Cleaning and Survey Recording Systems
-
Search for power poles on the net - other suppliers sell them too
Stockists of Genuine Omnipole PowerPoles are
Sureclean Systems
All Clean Services
Express Cleaning Supplies
All Clean and Sureclean also stock and supply Omni GutterVac equipment
Omnipole Systems Ltd
www.omni-guttervac.com
Product Number Name Description Price Per
Unit + VAT
Complete Professional
Gutter and high level
Exterior Cleaning and
Surveying System
FULL PACKAGEGutterVac System 48' reaches 52'-
OmniCam Survey system and 36' Gutter and High Level
Pressure washing System - Generator £4795.00
GutterVac with 50mm Hose supplied with commercial &
Domestic gutter cleaning heads
24/110GV GutterVac 24' 110 volt 4200 watt motors - 15 metres 50mm hose - 4 x 6' telescopic tubes £1,090.00
24/240GV GutterVac 24' 240 volt 4200 watt motors - 15 metres 50mm hose - 4 x 6' telescopic tubes £1,090.00
30/110GV GutterVac 30' 110 volt 4200watt motors - 15 metres 50mm hose - 5 x 6' telescopic tubes £1,140.00
30/240GV GutterVac 30' 240 volt 4200 watt motors - 15 metres 50mm hose - 5 x 6' telescopic tubes £1,140.00
36/110GV GutterVac 36 110 volt 4200 watt motors - 15 metres 50mm hose - 6 x 6' telescopic tubes £1,190.00
36/240GV GutterVac 36 240 volt 4200 watt motors - 15 metres 50mm hose - 6 x 6' telescopic tubes £1,190.00
42/110GV GutterVac 42 110 volt 4200 watt motors - 15 metres 50mm hose - 7 x 6' telescopic tubes £1,240.00
42/240GV GutterVac 42 240 volt 4200 watt motors - 15 metres 50mm hose - 7 x 6' telescopic tubes £1,240.00
48/110GV GutterVac 48 110 volt 4200 watt motors - 15 metres 50mm hose - 8 x 6' telescopic tubes £1,290.00
48/240GV GutterVac 48 240 volt 4200 watt motors - 15 metres 50mm hose - 8 x 6' telescopic tubes £1,290.00
Replacement hose per metre £8.57
Replacement hose
15 metre coil lightweight reinforced pvc only 0.43kg per metre -5 to+ 80C
recommended retail price £204.55 £120.00
AS/50/15 Anti static hose option 15 metres 50mm Anti Static Hose please add to system cost £220.00
24/support pole Support Pole for all 48' systems 24' pole to enable two operators to support the 48' systems £262.00
Cam system
Omn-Cam Survey System -
Various poles available at extra
cost
Supplied in padded aluminium flight case1/3" super sensitive
CCDcam,monitor/recorder,batteries,AV in/out
accessories,cable,cam mount,computor linking hardware £595.00
Gutter and High Level Pressure
Washing System - Complete high
level exterior deep cleaning
system, brick, stone,
cladding,graffiti,posters and
gutter high powered washing
system- includes standard low
level lance
3000 PSI 15 litre per minute Honda GX340 11HP Pressure Washer,low
speed interpump plunger pump with brass manifold driven via reduction
gearbox,unloader valve with pressure controler,10 metres hp hose,3 metre
suction hose,filter,chemical injection facility,gutter hook,straight
attachment,heavy duty two piece gun and lance for ground level cleaning,set
of quick connect jets,PowerPole,gutter spike.
24' telescopic PowerPole system as above £2,181.00
30' telescopic PowerPole system as above £2,231.00
36' telescopic PowerPole system as above £2,281.00
Whirlaway
Whirlaway flat surface Cleaners -
connects to pressure washer to clean
paving,drives,roads,paths etc. - cleans upto
20 square metres of paving etc.a minite
Special prices when purchased with the complete GutterVac system 16" 18"
or 20" versions
Generator Operate the Omnivac system without mains power
Step gen
Honda engined Generator with wheel kit -
This unit is heavily discounted the list
price being £1147.00 + wheel kit
Honda four stroke engines with oil alert / Noise compliant using the latest low noise engine
specification / Dual voltage output c/w overload protection / Fully welded industrial carry
frames for maximum strength / Brushless maintenance free Markon alternators with
exceptional component design quality / Rubber bushed control boxes for longevity of electrical
components Specifications OUTPUT: 6.0kVA / 4.8KW SOCKETS: BS4343 industrial
sockets -1 x 115V 16A sockets1 x 115V 32A sockets2 x 230V16AsocketsENGINE:HONDA
HP/CYLINDERS:11.0/1 START:RC FUEL TANK:6.5 litres RUN TIME:3.5 hours @ 75% Load
NOISE LEVEL:71dB (A) @ 7 metres. 97LWA SIZE:L690x W480 x H540mm WEIGHT: 59kg
£775.00
Gennie wheels Wheel Kit for Generator Wheel kit to enable generator to be transported £55.00
Omnipole 3 Hermitage Lane, London SE25 5HH, 020 8405 6782 Fax: 020 8405 6780 Web Site:
Gutter + High Level Surface Cleaning and Survey Recording Systems
There you go, and some free advertising too. ;)
-
how reliable is yer generator gwcs? how long ye had it etc etc
-
how reliable is yer generator gwcs? how long ye had it etc etc
cant help on this one, only had it a couple of weeks, only used it once.