Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: concept on June 13, 2009, 09:20:38 am

Title: merlin ro question
Post by: concept on June 13, 2009, 09:20:38 am

in this pic, can anyone tell me which port is inlet/outlet/waste

(http://i23.photobucket.com/albums/b383/h20ruf/DSC01610.jpg)

in this one, can anyone tell me what this canister is, what i am meant to do with it, and do i need it?!

(http://i23.photobucket.com/albums/b383/h20ruf/DSC01611.jpg)

thanks again!

Title: Re: merlin ro question
Post by: Alex Gardiner on June 13, 2009, 09:23:35 am

Inlet is the larger half inch white elbow connector. Outlet is the 3/8" blue elbow and waste is 3/8" black connector. The tank is a flush tank which primes the membranes on start up with pure water, helps them last slightly longer. Not really needed, but useful.

Title: Re: merlin ro question
Post by: concept on June 13, 2009, 12:34:01 pm

thanks alex!  8)

can it be laid on its side ok?

looking at different ways to mount it in van.

Title: Re: merlin ro question
Post by: Window Washers on June 13, 2009, 01:39:06 pm

Quote from: concept on June 13, 2009, 12:34:01 pm

thanks alex!  8)

can it be laid on its side ok?

looking at different ways to mount it in van.

I would have it standing upright m8, if you want it out the way then in the far right side next to cage if it will fit there  ;) then run hoses round tank frame, on it side would take up more room and also easier to damage  ;)

Title: Re: merlin ro question
Post by: Alex Gardiner on June 13, 2009, 05:10:57 pm

Quote from: concept on June 13, 2009, 12:34:01 pm

thanks alex!  8)

can it be laid on its side ok?

looking at different ways to mount it in van.

The Merlin unit can be laid on its side if needed.