Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Steve Weatherley on April 27, 2005, 10:23:17 pm

Title: Mixing microsplitters
Post by: Steve Weatherley on April 27, 2005, 10:23:17 pm
Yesterday I cleaned a suite using 1:10 dilution. Today cleaned similar suite using 1:4 with better results (sounds obvious really doesn't it!). What seems to be the average dilution used to clean upholstery? Also does anybody mix their m/s with warm water or is it always cold?
Title: Re: Mixing microsplitters
Post by: ian richards on April 27, 2005, 10:30:33 pm


Hi Steve

I generally use warm water, but if i have some left over from a previous clean, i'll use that.  I can't say that i notice the difference really ???

Ian

Title: Re: Mixing microsplitters
Post by: Doug Holloway on April 27, 2005, 10:34:07 pm
Hi Guys ,

By the time it comes out of the nozzle , travels 2 feet down to the carpet  , the atomised spray will be pretty close to room temp.

cheers,

Doug
Title: Re: Mixing microsplitters
Post by: Steve Weatherley on April 27, 2005, 10:34:20 pm
Hi Ian and thanks for the reply. What rate of dilution do you use for upholstery? (on average)
Title: Re: Mixing microsplitters
Post by: Dynafoam on April 27, 2005, 11:22:08 pm
Steve,

After a great deal of experimentation I find that a dilution rate of 1:16 seems the most effective/economical.

If mixing a fresh batch I normally use hot water but as Doug has pointed out, the cooling of the mist-spray is so rapid that, like Ian, I use cold left-overs with no discernible difference in efficacy.
Title: Re: Mixing microsplitters
Post by: ian richards on April 28, 2005, 06:38:14 pm


Hi Steve

The same as John 1:16, some times more if i think it needs it.

Cheers

Ian
Title: Re: Mixing microsplitters
Post by: ABLECLEAN on April 28, 2005, 07:44:34 pm
Ian    Is John 1:16 a passage from the Bible?
Title: Re: Mixing microsplitters
Post by: ian richards on April 28, 2005, 09:23:38 pm


I LIKE IT  ;D ;D ;D
Title: Re: Mixing microsplitters
Post by: stu_thomson on April 28, 2005, 09:41:08 pm
im trying the craftex one at the mo and diluting 1/20 as advised, am getting good results with this, doesnt seem right though putting such a small amount into sprayer. Anyway it works and is very economical.
Ps has anyone tried bane cleans baby powder scent in your tank its bloody bootiful! and the ladies luv it :-*
  regards stu
Title: Re: Mixing microsplitters
Post by: Shaun_Ashmore on April 28, 2005, 10:04:09 pm
I find with MS that less  is more!

I find 1:16 works the best for me but I do only mist it on carpets or upholstery they are hardly damp the aggitation is the main key, or is it that I'm a tight Yorkshireman ;D

Shaun

PS does anyone remember Paul Elliott selling an electrical  rotating brush for upholstery/stairs?

Just thinking if it would be any good for cleaning with a microfibre pad on it for upholstery cleaning.

Title: Re: Mixing microsplitters
Post by: Martin S on April 29, 2005, 08:51:46 am
Shaun,

I was thinking along similar lines a few days ago. 

Quite a few CC's use the Texatherm 'Minitex' for upholstery.  Although I don't have one yet I've seen it in use, and it's good, as the bonnet removes/absorbs some of the soiling. 

I was thinking though.....Would you get even better results, and more soil removal, if the bonnet had a Microfibre 'face'?

Just wondering.

Regards.

Martin
Title: Re: Mixing microsplitters
Post by: Musicman on April 29, 2005, 01:49:36 pm
Interesting point Martin. We bought a Minitex at the MK get-together and used it on several flights of stairs within an office last week.

While the results were reasonably good I wondered if we would get an improved clean with microfibre bonnets.

Is anyone aware of any manufacturers that make them that size?

Regards

Musicman
Title: Re: Mixing microsplitters
Post by: Derek_Walker on April 29, 2005, 09:13:56 pm
Hi
I use a caddy clean made by contico, it uses a clip on 9v rechargable battery which seems to run all day before needing a charge.
It is lightweight with 2 x 10 centimeter / 14" contra rotating pads with velcro for using floor stripping and polishing pads. They also come with micro fibre pads which i use on upholstery sometimes. Also comes with a range of different strength brushes.
It also comes with a clip on retractable handle and tank for floor scrubbing.

Not a cheap piece of kit, If memory serves me well about £500.00, but well worth it for the versatility and multitude of uses.
Title: Re: Mixing microsplitters
Post by: Martin S on April 30, 2005, 08:26:39 am
Derek,

Who sells them?

Martin
Title: Re: Mixing microsplitters
Post by: Derek_Walker on April 30, 2005, 12:30:47 pm
Hi Martin

They are made by Contico, Your local cleaning supplier should be able to get them for you.
Title: Re: Mixing microsplitters
Post by: Martin S on April 30, 2005, 02:07:11 pm
Cheers Derek.

Martin
Title: Re: Mixing microsplitters
Post by: Derek_Walker on April 30, 2005, 11:24:48 pm
Mistake from former post, should be 2 x 4" contra rotating pads.