Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: The Seven Bays Window Cleaning Company on June 08, 2009, 03:44:28 pm

Title: Di bypass connectors & valves
Post by: The Seven Bays Window Cleaning Company on June 08, 2009, 03:44:28 pm

I would to have the option to run unfiltered water from my tank for Conservatory roofs, gutters ect.

Is there anything on the market that would allow this?

Basically I think I need 2 x 'Y' Piece 1/2inch  barbed connectors, and 2 x On/Off Valves again with a 1/2inch barbed connection.

I've had a nose around the net, and couldn't find anything suitable.

Thanks

Marc

(http://i64.photobucket.com/albums/h190/MPElliott/DiBypass.jpg)

Title: Re: Di bypass connectors & valves
Post by: tomy jackson on June 08, 2009, 04:05:27 pm

thay sell thos  Y s in bq in the sction wear the chans , rope , hose by the meter

Title: Re: Di bypass connectors & valves
Post by: Pittmonkey on June 08, 2009, 04:20:54 pm

I tried these, they're OK but not perfect when under pressure.

Wayne

Title: Re: Di bypass connectors & valves
Post by: NWH on June 08, 2009, 05:55:40 pm

Just buy a long length of pole hose with hoselock adapter on the end so you can plug into there outside tap.

Title: Re: Di bypass connectors & valves
Post by: john tomkins on June 08, 2009, 08:20:51 pm

What sort of connector goes into the 1st DI cylinder?
Can't you just buy the male/female opposite, disconnect the fitting and couple up straight to your hose from the tank.

Title: Re: Di bypass connectors & valves
Post by: sparklebright on June 08, 2009, 09:07:20 pm

If the con. roof is green or something I tend to give it a blast using the custy's tap water first, then use purified to rinse. Does a fine job.