Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Pittmonkey on June 01, 2009, 11:09:06 pm
-
Done some reading on the you know where Matt ::)
Looking at this
http://wmac.co.uk/index.php?main_page=product_info&products_id=41
This
http://wintecs.co.uk/catalog/product_info.php?cPath=57_29_69&products_id=224
Plastic or Zinc (Not sure if there's a pref)
and this
http://wintecs.co.uk/catalog/product_info.php?cPath=57_29_69&products_id=406
Brush & Hose already sorted
Thanks
Wayne
-
Done some reading on the you know where Matt ::)
Looking at this
http://wmac.co.uk/index.php?main_page=product_info&products_id=41
This
http://wintecs.co.uk/catalog/product_info.php?cPath=57_29_69&products_id=224
Plastic or Zinc (Not sure if there's a pref)
and this
http://wintecs.co.uk/catalog/product_info.php?cPath=57_29_69&products_id=406
Brush & Hose already sorted
Thanks
Wayne
thats the pole
the angle adaptor, i have since done away with, i just use a very short piece of unger pole glued to the end of the pole and with the Vikan brush the angle is right for me to use
if you havent got any unger pole, wait till the "Unger Cone - Insert
[BE000]" that you have listed arrives, pop into B&Q and look at some of the metal tube, they sell the exact size you need, just take the unger cone in and find the tube that the cone slides into with a nice fit ( then you just need to drill 2 holes )
job done
-
Understood Matt. Thanks :)
I take it the Std WFP angle adpt will fit onto the unger cone. I will need to angle the brush occasionally.
Wayne
-
Understood Matt. Thanks :)
I take it the Std WFP angle adpt will fit onto the unger cone. I will need to angle the brush occasionally.
Wayne
yes, you will just take the " vikan / unger cone " out of your pole and fit the unger angle adpt and then just fit the vikan / unger cone in the end of it