Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: michael robinson on May 27, 2009, 01:47:50 pm
-
Hi Guys i will explain my problem and if someone out there can figure it out please give full instruction and not just a few words.Ok i have been working fine until today the problem started when i would turn on the digital varistream set at E and on number 6 that works my shurflo pump and we have water and are happy today when i first switch on all is ok until i then turn the tap off to say lower the pole etc.. then when i turn tap back on there was a delay before the water would come out, nad over the course of the day things got worse to the point that when i truned the tap off and turned it back on no water was coming out, so i had to make a trip back to the van and the varistream would be on and lit but no noise from the pump, i would have to physically switch off varistream and switch it back on then pump would kick into action and away i would go everything would work well until i had to trun tap off again then same problem. Does anybody have a clue what's going on?????
-
put a bypass on your pump and dicth the V
-
This is exactly the kind of remarks that i didn't want. What do you mean can you explain or someone else explain please.
-
GO TO THE DIY forum thers a grate pik on ther of a by pass on ther
-
Give willimsons pumps a call and they should be able to help you as they make them. ;)
0845 226 3638