Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Andy@w.c.s on May 21, 2009, 05:10:38 pm

Title: T D S how high
Post by: Andy@w.c.s on May 21, 2009, 05:10:38 pm
Hi all
i am wondering what is the highest tds water  level you have worked with  tested mine today and found it has shot up to 5ppm time for a resin change i think !

Andy
Title: Re: T D S how high
Post by: GWCS on May 21, 2009, 05:19:06 pm
working with 12 today  ;D
Title: Re: T D S how high
Post by: Andy@w.c.s on May 21, 2009, 05:24:43 pm
12  :o
and was that alright ?
Title: Re: T D S how high
Post by: CLEANGLASSUK on May 21, 2009, 05:29:29 pm
If you use it at 12ppm you cannot gaurantee perfect results.
Title: Re: T D S how high
Post by: Sunshine/Cleaning on May 21, 2009, 05:30:06 pm
Just changed mine as it was at 20.

Nobody complained!  ;D
Title: Re: T D S how high
Post by: WCE on May 21, 2009, 05:32:11 pm
Thats interesting, thats what my RO puts out before resin. If it works that high cool! I don't need resin anymore!!! Seriously have you seen what the quality is like at 20ppm? 
Title: Re: T D S how high
Post by: Andy@w.c.s on May 21, 2009, 05:34:18 pm
Just for piece of mind i am going to clean on of my own to see how it drys back have always tried to keep it down too 2ppm
am i being paranoid  :'(
Title: Re: T D S how high
Post by: WCE on May 21, 2009, 05:36:30 pm
Just for piece of mind i am going to clean on of my own to see how it drys back have always tried to keep it down too 2ppm
am i being paranoid  :'(
To answer this I have used 10ppm before with no problems, so YES  ;D ;D ;D
Title: Re: T D S how high
Post by: Sunshine/Cleaning on May 21, 2009, 05:40:12 pm
Thats interesting, thats what my RO puts out before resin. If it works that high cool! I don't need resin anymore!!! Seriously have you seen what the quality is like at 20ppm? 

Not perfect. There were a few tiny spots but nothing that would draw any remarks. Personally if it gets above 5 I would change it, I just got sidetracked with checking the TDS. Now it is changed results have been perfect even with my newbie cleaner. He cant get over how well it works.
Title: Re: T D S how high
Post by: Mike 108 on May 21, 2009, 05:44:54 pm
I've recently taken on 2 new customers who only wanted a window cleaner because the upstairs windows were filthy.

The downstairs windows were Ok.

when I asked them who had been doing the downstairs windows - they both said that they did them themselves with a HOSEPIPE.

And they looked OK!

The TDS of the tapwater was over 100 ppm.   ???

Title: Re: T D S how high
Post by: WCE on May 21, 2009, 05:51:30 pm


The downstairs windows were Ok.
The TDS of the tapwater was over 100 ppm.   ???


Blimey thats good! On a good day the TDS here is 250 odd others upto 550!
Title: Re: T D S how high
Post by: Andy@w.c.s on May 21, 2009, 06:06:58 pm
Well its dried back fine  ;D
so i feel  alittle better now , not that we have had any complaints but its just piece of mind  :)
Title: Re: T D S how high
Post by: johnny_h on May 21, 2009, 06:09:37 pm
i have used water upto 16 ppm with no problems i didnt realise it was that high though but the results were still good
Title: Re: T D S how high
Post by: Mike 108 on May 21, 2009, 06:13:12 pm

The downstairs windows were Ok.

when I asked them who had been doing the downstairs windows - they both said that they did them themselves with a HOSEPIPE.

And they looked OK!


I should have asked them if it had rained since they last did them - that could have accounted for them being so clean.
Title: Re: T D S how high
Post by: GWCS on May 21, 2009, 06:16:31 pm
12  :o
and was that alright ?

Yup, few little spots.. Nothing bad unless your looking for them - which i was.

But the insides are generally dirtier anyway, so i doubt anyone notices.
Title: Re: T D S how high
Post by: R.V.A Window Cleaning Services on May 22, 2009, 12:14:27 am
Up to 24 just rinse well ;)
Title: Re: T D S how high
Post by: EZclean on May 22, 2009, 12:24:11 am
ive used 14 on first cleans and has been surprisingly very good. i would try to keep it under 10 if possible, i was DI only when i first started, tap tds 98-104,  i have an RO now and it comes out before DI at 1ppm. i seriously thought about not using the DI. but for what work the resin is doing i might as well have 000