Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Joe H on May 08, 2009, 07:36:35 am
-
Texatem rotary system
http://cgi.ebay.co.uk/Texatherm-Carpet-Cleaning-Equipment-Machine_W0QQitemZ250419432538QQcmdZViewItemQQptZUK_HomeGarden_CLV_Cleaning_CA?hash=item250419432538&_trksid=p3286.c0.m14&_trkparms=72:1688|66:2|65:12|39:1|240:1318|301:0|293:1|294:50
-
Joe
Looks like the same one that was on e bat a while ago doesnt it ???
-
Missing a lot of powder coating around base, I would want to see it working!
Gary
-
Im sure that the loss of powder coating on the base of the swing machine does not affect the way it works ;D We have one that is near 10 yrs old that still works a treat. Simply rub it down & apply some Hammerite & it will look like new. Anything i buy from ebay i test if required before i hand over money because if you dont then you get it home it becomes your problem.
Richie.
-
are we looking at the blue bits showing on the base of the machine?, thought that was the texatherm decals, or do i need glasses.
derek
-
Derek
Think he means the digital heater tank ???
Wouldnt have thought it would leak and inside the tank is a thermos like the inside of a flask that the water sits in with the heater eliment ...
-
No Clinton, was referring to the rotary. Missing powder coated blue covering from base. That means it would have been heavily used. These particular machines have not been around for a great many years, so it has been heavily worked
-
How so much blue would be removed from that area (on top of the base) is a mystery to me - even with heavy use.
Can only think it would be a bad paint job - base not clean enough for paint to adhere to.
I am sure my model was chrome on the top of the base - like the top plate of the motor.
-
Maybe hes got lots of prespray on it that all i can think ::)
-
Joe,
A batch of the previous 17" m/c had just a powder coated top and no stainless steel deck. Mark dropped them after that as the 17" with decking had been fazed out due to cost.
Gary