Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: andrew.ralph@homec on May 04, 2009, 11:45:10 am
-
hi all could anybody tell me where to get a good tap between my pole and micobore cheers andy
-
http://cgi.ebay.co.uk/POLE-FLOW-CONTROL-VALVE-WATER-FED-POLE-WINDOW-CLEANING_W0QQitemZ260403233271QQihZ016QQcategoryZ112579QQtcZphotoQQcmdZViewItem
There you go mate
-
http://cgi.ebay.co.uk/POLE-FLOW-CONTROL-VALVE-WATER-FED-POLE-WINDOW-CLEANING_W0QQitemZ260403233271QQihZ016QQcategoryZ112579QQtcZphotoQQcmdZViewItem
There you go mate
I use that same control and pay less than a tenner I use ARP-Co in Avonmouth Bristol but I only live three miles away and collect - it's a generic tap and they are industrial suppliers. A word of warning - the butterfly tap handle is die-cast and fractures if it hits concrete hard. I wrap my handle in a few layers of gaffer tape to cushion any knocks.
-
I like this one. You can attach it to your pole with a couple of tie wraps.
http://cgi.ebay.co.uk/Microbore-Water-Fed-Pole-Quick-Release-Connector-Tap_W0QQitemZ270328465743QQcmdZViewItemQQptZUK_HomeGarden_CLV_Cleaning_CA?hash=item270328465743&_trksid=p3286.c0.m14&_trkparms=72:1683
I use one on each pole and then I can just plug the pole into the hose from the trolley. One pole is a regular 17 foot and the other is a broom handle for tight areas or bungalows.
-
Gardiners do these.
-
Gardiners do these.
are they any good as i am sick of replacing taps after a few weeks >:(
-
Gardiners do these.
are they any good as i am sick of replacing taps after a few weeks >:(
ive been using this type for over 3 years and never had a problem .
-
Gardiners do these.
are they any good as i am sick of replacing taps after a few weeks >:(
ive been using this type for over 3 years and never had a problem .
i use 8mm micro bore so it wouldn't fit would it?
-
Gardiners do these.
are they any good as i am sick of replacing taps after a few weeks >:(
ive been using this type for over 3 years and never had a problem .
i use 8mm micro bore so it wouldn't fit would it?
Just put that valve on the pole hose it does the same job and is easier to fix if anything goes wrong.
-
Gardiners do these.
are they any good as i am sick of replacing taps after a few weeks >:(
ive been using this type for over 3 years and never had a problem .
i use 8mm micro bore so it wouldn't fit would it?
Just put that valve on the pole hose it does the same job and is easier to fix if anything goes wrong.
[/quote"DURH" :o OH YEA sorry ]