Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: pingu on April 25, 2009, 06:15:11 am
-
Hi All...just thought I would try and collate some info about the HF4 & 5-4040 system as a lot of people have them....It would be great over the year to get these results at various temps say 25, 20, 15, 10, 5.
The aim of this is to try and guage end results, production and times and then post it so that others may benefit from our shared knowlegde
So if you have this system and would like to help would you post on here as mine below
------------------------------------------------------------------------------------------------------------
Date: 24/04/09
Temp: 19 deg
TDS in: 262
TDS out: 5
After DI 1: 0
After DI 2: n/a (If you run a dual DI system).
DI Resin brand: Purolite
Tap pressure pref in psi: 55
Location: (Town & County) Brabant, The Netherlands.
Litres 'good' per minute: 1900ml
Litres 'waste' per minute: TBA
Pumped or unpumped: unpumped
Pumped pressure:n/a
Pumped litres per min: n/a
My system is a single HF5-4040> 20inch Sediment> 20 inch carbon filter> 13 inch DI vessel> not pumped.
------------------------------------------------------------------------------------------------------------
Cheers for taking the time
Dave.
-
Hi Dave,
This is actually very interesting. Is the 1900ml per minute the rate of production or the rate of the feed?
-
This is the produced water Alex.
Cheers
Dave.
-
politely >>>>> bump
I would also be intrested in compiling a database of tap tds and water pressure from members here whether UK or elsewhere...
I would then post this information on this site for others to use as a reference, just post your town/county/country...tap tds and water pressure pref in psi....if you wuold like to help that is :)
Much appreciated
Cheers
Dave.
-
hi dave
forest of dean tds 187
water pressure where i am in lydney over 100, its off the scale ;D
will blow the seals and needs to be turned down
but i mainly use rain water now :)
mike
-
Thanks for that...you're number '1' ;D
-
dave ive just realised i dont have a 40 40 system :'(
hope the data helps though ;D
-
Thats fine Mike...it'll be usefull for those who are intrested about TDS values in your neck of the woods.
Cheers for taking the time and posting.
Dave.
Once I get 20 or so enteries, I'll post the info in .pdf format in the 'Documents' section.
-
West Sussex. (Midhurst).
Pressure: aprox 80
TDS: 360 to 380 depending on the time of year.
Only just picked this post up.
-
harrogate
n/yorks
tds 84
-
polite >>>> bump...
Cheers
Dave.
-
Hi Dave
Would who supplies your water help?
In Birmingham we have South staffordshire water at 330ppm
or Severn Trent water at 75 ppm
Tony
-
Hi Tony...Brabant Water supply my water (here in Holland ;D).
Cheers for the info.
Dave.
-
Hi Dave
Would who supplies your water help?
In Birmingham we have South staffordshire water at 330ppm
or Severn Trent water at 75 ppm
Tony
not sure if it helps dave
severn trent supply us at 187
so different from above post , mores the pity :( ;)
-
That's interesting, i'd like to see the difference in water..
I'm only 1/2 hr from Midhurst (mentioned earlier ::) )
I live near the border of three counties; West Sussex, Surrey and Hampshire. (near LIPHOOK)
My water tds is aound 150.. My pressure is throught the roof, well over 10 bar, if I turn the tap on more than 1/2 turn, it forces the solenoid off. It also burst open the pro 5 softener tube!! :o
Look forward to the database results!!
-
Keep them coming...the more the better...
Cheers
Dave.
-
You should change the thread title to something like "Water TDS database - What's yours?"