Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: crystal.clear on April 24, 2009, 05:46:42 pm

Title: connecting a pump to van battery
Post by: crystal.clear on April 24, 2009, 05:46:42 pm

hi, i have a ionics system in one of are vans but i just brought a new hiace and im goin to put a new 500lt tank in it.  from wot i can tell ionics have just connected the pump direct to my van battery. so the red wire from the pump direct to battery and black wire to. is this ok to do on my new van. i will also put two fuses on the wires

Title: Re: connecting a pump to van battery
Post by: Slash on April 24, 2009, 07:59:04 pm

A guy up the road from me has an Ionic system fitted and it's wired to the van battery as all is fine .

Title: Re: connecting a pump to van battery
Post by: LWC on April 24, 2009, 10:48:59 pm

Mines all fitted to van battery. 2 pumps, all day every day.

Title: Re: connecting a pump to van battery
Post by: Window Washers on April 25, 2009, 02:39:02 am

Quote from: LWC on April 24, 2009, 10:48:59 pm

Mines all fitted to van battery. 2 pumps, all day every day.

When you battery starts playing up the problem will be it will not start, as long as your with a breakdown recovery place you should be fine, I am going to do this as i'm sick of charging three batteries every day for systems, if I forget I have to buy a cheap car battery for the days work (not good) I would defo have fuses on it though, i'm shock Ionics dont have fuses inline seems a little dodgy to me :-\

Title: Re: connecting a pump to van battery
Post by: tomy jackson on April 25, 2009, 04:28:43 am

it neads to be on the frunt bat as that i the slave bat to make it up to 24 volt ,mines bin no probs , to fuse neads to be on top of bat