Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: chrisdean on April 13, 2009, 05:51:05 am
-
I have a wonder wand.
It has a leak and i need to find replacement part so i can repair.
Does anyone know where i can get parts?
-
http://www.amtechuk.biz/#
-
what part is leaking?
-
what part is leaking?
THIS IS IT:
-
is it the filter that is leaking. cleansmart would prob help you out pronto
-
is it the filter that is leaking. cleansmart would prob help you out pronto
Yes i think inside this part there is probably a filter, but i am not sure cause i have never taken one apart.
Mine looks like a previous owner has cross threaded it when re-assembling (as a result it is screwed in on an angle - you can see a black rubber seal ring poking out of the gap).
So i tried to unscrew it & fix but i couldn't get it to move.
So i will be replacing the whole part.
Will i need to order a filter as well?
-
yeah believe they come complete best to clean filter when you get new one on reg basis
-
had the same problem with my w/w, got some replacement "o" ring seals, costs pence from amtech... but, before you do anything, make sure that the fitting for filter chamber is really done up tight... the whole fitting costs about £40- quid!!! charlie :o
-
Got part from Amtech Uk - excellent service & quick delivery. Total cost was £54.
-
Nicely made stuff from Amtech.
Shaun
-
Filter should be cleaned daily, when reassembling, smear a little defoam onto threads and hand tighten only.
Andrew
-
If I went porti again I'd get a ww, I had one for my TM but it just locked onto the carpet.
Shaun
-
Shaun
Tell me about it and I was running at max + 50ft
Len
-
The ww is made in such a way that you get lock down quite easily, also wasn't happy with the way it cleaned.
Shaun