Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: smearo on April 08, 2009, 08:34:33 pm

Title: 0 rings
Post by: smearo on April 08, 2009, 08:34:33 pm

what size o rings is the norm on the hose for the pole there is 3 different sizes and i wanted to get a few spares..

Title: Re: 0 rings
Post by: smearo on April 08, 2009, 08:55:37 pm

have i asked a silly question here or something my new pole come today and it had a different fitting to the one on my microbore hose so i managed to bodge the old o ring and fitting back on to the new pole hose

Title: Re: 0 rings
Post by: smearo on April 08, 2009, 09:26:59 pm

come on guys

Title: Re: 0 rings
Post by: Alex Gardiner on April 08, 2009, 10:32:23 pm

Here are the sizes we use:

Inner Ring ‘O’ Clip 7.5-9.5mm.  We use this size for 5mm id pole hose fitted with EZ snap or pro tails.

Inner Ring ‘O’ Clip 9.5-10.4mm.  We use this size for 5mm id pole hose fitted with nylon Hozelock tails.

Inner Ring ‘O’ Clip 10.4-12.4mm.  We use this size for fittings on 6mm id Microbore hose.

Title: Re: 0 rings
Post by: smearo on April 09, 2009, 08:35:20 am

thank u alex so i guessing 5mm is the norm..  ::)  ::)  ::)

Title: Re: 0 rings
Post by: Alex Gardiner on April 09, 2009, 08:39:33 am

Yes

Title: Re: 0 rings
Post by: RO-Sheen on April 09, 2009, 08:41:59 am

Are you and Alex talking about the same things???
I think you are talking about the black rubber o rings that seal the male part of a hoselock, and Alex is talking about the metal clips for tightening connections (Clips similiar to jubilee clips)

Title: Re: 0 rings
Post by: Pj on April 09, 2009, 08:44:53 am

comparetheOrings.com

simples!
 ;D

Title: Re: 0 rings
Post by: smearo on April 09, 2009, 08:49:55 am

nope same as alex cheers anyway..
can you post yr web address now alex
and i shall order some  ;D  ;D  ;D

Title: Re: 0 rings
Post by: matt on April 09, 2009, 04:10:30 pm

Quote from: Pj on April 09, 2009, 08:44:53 am

comparetheOrings.com

simples!
 ;D

 ;D ;D ;D ;D ;D

dot com

Title: Re: 0 rings
Post by: R W C on April 09, 2009, 04:15:30 pm

http://www.gardinerpolesystems.co.uk/acatalog/Hose_Fitting_Kits.html

Title: Re: 0 rings
Post by: dai on April 09, 2009, 08:06:49 pm

I have a set of rubber O rings in various sizes, can't get the right ones for Hozelock though, I always have to rob one off another Hozelock fitting, It's the ones on the hose reel inlet that tend to ware.