Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: cswc on February 21, 2009, 12:23:52 pm

Title: pump stopped
Post by: cswc on February 21, 2009, 12:23:52 pm

My shurflow pump stoped today and i dont know why,

its a 100psi pump and ive bypassed the pressure switch the pump is not connected to a varistream or namesake but i have set it up as follows:

out of the pump before the di vessel i have an equal tee which sends reject water to back to the tank its allows water to go to the tank when i turn off the water at the pole when the water goes back to the tank it passes a pressure release valve.

any ideas ??

Title: Re: pump stopped
Post by: jonisondell on February 21, 2009, 12:49:33 pm

remove pump from setup first, just connect to a battery/12v to test pump
have you a filter before pump, if any bits get into pump diaphram will stop flow, pump will turn but no flow can be fixed
varistream or namesake ??
using a meter check voltage to varistream and out