Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: oliver collins on February 07, 2009, 06:42:08 pm

Title: V2 Steammate
Post by: oliver collins on February 07, 2009, 06:42:08 pm
Hi Guys

I am looking for some info regarding the Ashbys V2 Steammate.

How well do they work ie does the water get hot enough quick enough?

How long is its working life ?

Will it hook up to my Extrcta Exel Machine ?

How much do they cost ?

Any comments welcome

Oliver Collins Rise & Shine Carpet cleaning
Title: Re: V2 Steammate
Post by: Mike Halliday on February 07, 2009, 08:28:47 pm
it will hook up to most portables.

it will provide short bouts of steam or a continuous flow of warm water, don't expect it to provide hot water throughout the clean, it just won't happen

they cost around £350ish

don't know how long they'll last

Title: Re: V2 Steammate
Post by: Shaun_Ashmore on February 07, 2009, 08:42:36 pm
You get spiked heat, mine didn't last long as the water sits in a reservoir and heats up and burnt out but mine was one of the early models, to get live steam all of the time you would have to stop keying the wand to keep the water hot or reduce the flow by getting smaller jets on your wand.

Shaun
Title: Re: V2 Steammate
Post by: Roy Edwards on February 07, 2009, 09:14:51 pm
Big problem with them is if you forget to turn V2 off when you are not cleaning for more than 10 mins they burn out very quickly .Its a great bit of kit for that rare occasion when custy has no hot water .
Title: Re: V2 Steammate
Post by: Darren O on February 07, 2009, 09:15:26 pm
Acording to Ashbys website they start from £599+vat.
Title: Re: V2 Steammate
Post by: Mike Halliday on February 07, 2009, 09:18:05 pm
£599+vat :o :o

not worth it.
Title: Re: V2 Steammate
Post by: Roy Edwards on February 07, 2009, 09:21:33 pm
Have to agree with you Mike,bought mine secondhand,sure there are cheaper options that are as good if not better.
Title: Re: V2 Steammate
Post by: Tony Gill Carpet Smart on February 07, 2009, 11:58:28 pm
My ninja has built in steam mate v2 still going strong after 2 years brilliant bit of kit. Don't know about them burning out when not wanding unless buit in one is different often leave mine for a lot longer than ten mins only thing i do is turn pump flow down if leaving for a cupa. Only other thing is i never use it with cold water i use the in tank heater first to get temp up to 65% first then change over to steam mate v2.

CHEERS TONY
Title: Re: V2 Steammate
Post by: Doug Holloway on February 08, 2009, 09:15:52 am
Hi Guys

Tony is probably running his in the optimum way and gets high temps without too much strain as he is only asking the hest exchanger to give 20 degrees.

A 3 kw heater cannot put enough energy into a cold water stream to give continuous hot water .

Cheers

Doug
Title: Re: V2 Steammate
Post by: magic_carpet on February 08, 2009, 09:26:32 pm
i've got one you can buy if you want. if you don't want them to burn out, turn the temp down to a decent level and the thermastat will do the rest. you only need them steaming when you are removing gum. 
Title: Re: V2 Steammate
Post by: John Gregory on February 08, 2009, 09:44:52 pm
Mr magic carpet just noticed your from St Agnes , you stuffy get . Was down there last year , I've got family in Mount Hawk. was that your van outside the Driftwood

John
Title: Re: V2 Steammate
Post by: magic_carpet on February 09, 2009, 08:37:59 pm
probably..we have three vans .. i often have to leave one down there and walk home if you know what i mean!! the boys tend to like a drink after work also..we may have even been doing the carpets.     stuffy get??