Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: thewindowcleaner1 on March 16, 2005, 01:42:10 pm
-
Just been tendering for a job top windows about 50 ft off ground, Have been using WFP fpr three years now but mainly on domestic, are there any tricks of the trade to make shure that the first clean does the bussiness, I,m thinking at the moment along the lines of a) using warmed water b) t-ing into the water pipe with a traffic firm remover and injecting small amounts of said with the aid of small windscreen washer type system then as the solution rinses out of pipe giving final rinse to windows?
Any idea,s welcomed
-
I haven't worked that high, the highest so far is 40 odd feet, and that was 4 storeys :-\
If you are going to 'T' into your feed, just use GG3 or Unger liquid, in very dilute form!
When yo uget down to lower heights just dip the brush into a bucket with a normal solution of GG3/Unger liquid or other specialist window cleaning detergents.
As you have been using WFP for 3 years you know you have to go over this work a few times, rinsing thoroughly each time.
Adding a little detergent (not washing up liquid of course) can certainly help on a pig pen clean.
Over on another forum there are quite a few threads on the subject.
Ian
-
Highest ive done is 73 feet