Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: NWH on January 16, 2009, 09:37:56 pm

Title: New Varistream settings again.
Post by: NWH on January 16, 2009, 09:37:56 pm

I was playing about with the new 1 today and i noticed it had number settings and letter settings,are the letter ones pressure settings for the pump or are the numbers.

Title: Re: New Varistream settings again.
Post by: Nathanael Jones on January 16, 2009, 09:38:52 pm

Those varistreams are deadly,.. 1 electrical short and the van could catch fire!!!

;)

Title: Re: New Varistream settings again.
Post by: NWH on January 16, 2009, 09:39:44 pm

That`s what i thought that`s why i asked lol. ;D ;D ;D :-*

Title: Re: New Varistream settings again.
Post by: Nathanael Jones on January 16, 2009, 09:48:57 pm

LMAO!!
The letters are the "dead end control" pressure settings so far as I know,.. replacing the little blue dial on the old ones. I don't have a varistream, I use flowmaster, so I might be corrected yet,..

Title: Re: New Varistream settings again.
Post by: NWH on January 16, 2009, 09:51:49 pm

Do the flowmasters need a pressure switch,oh i nearly forgot i think there a re-badged eco-flo.

Title: Re: New Varistream settings again.
Post by: Nathanael Jones on January 16, 2009, 10:00:17 pm

The new ones don't need a pressure switch, but I'd always leave it in place as a failsafe in case the dead end control failed.

Title: Re: New Varistream settings again.
Post by: macmac on January 17, 2009, 10:58:11 am

The numbers which display by default are flow rate. In the "flashing menu" you have both letters & numbers. The letters are the pressure setting & the numbers are the cut off (electronic pressure switch) setting.

Here's my setting with 100psi surflo & 80m x 8mm minibore.

Flow = 1
Pressure = C
Cut off = 6

Tony

Title: Re: New Varistream settings again.
Post by: NWH on January 17, 2009, 08:37:26 pm

Quote from: macmac™ on January 17, 2009, 10:58:11 am

The numbers which display by default are flow rate. In the "flashing menu" you have both letters & numbers. The letters are the pressure setting & the numbers are the cut off (electronic pressure switch) setting.

Here's my setting with 100psi surflo & 80m x 8mm minibore.

Flow = 1
Pressure = C
Cut off = 6

Tony

Cheers Tony.