Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: East coast window cleaning Services on January 12, 2009, 02:36:39 pm

Title: Anyone got a brodex machine?
Post by: East coast window cleaning Services on January 12, 2009, 02:36:39 pm
Do you run minibore or Normal Tricoflex as my pump dont seem to want to work with microbore??? Changed the 60psi to my spare 100 psi pump no different
Title: Re: Anyone got a brodex machine?
Post by: Andrew McCann on January 12, 2009, 02:40:20 pm
Does your machine have a Varistream controller?

If it does you will probably need to recalibrate it to work with minibore.

Andrew
Title: Re: Anyone got a brodex machine?
Post by: East coast window cleaning Services on January 12, 2009, 02:41:17 pm
yeah it has to flow controls for each pump. Andrew sorry to appear thick how you do that?
Title: Re: Anyone got a brodex machine?
Post by: ftp on January 12, 2009, 02:41:50 pm
I have a Brodex .................
















coaster - arrived this morning, very handy too. Wouldn't buy anything off them though because i don't like their marketing techniques.
Title: Re: Anyone got a brodex machine?
Post by: SherwoodCleaningSe on January 12, 2009, 02:48:07 pm
Open the varistream up, inside there should be a little blue dial, adjust this untill the water flows with the valve open but stops after a few seconds of closing it. If it's a digital you get to the same adjustment by pressig the up and down arrows at the same time, no need to open it up. 

Simon.
Title: Re: Anyone got a brodex machine?
Post by: Andrew McCann on January 12, 2009, 02:50:31 pm
Is it the digital varistream or the one with the numpty that you turn on it?

Lel me know which and I will try to help.

Andrew

Oh Simon has done it already  lol  :)

Andrew
Title: Re: Anyone got a brodex machine?
Post by: East coast window cleaning Services on January 12, 2009, 02:51:28 pm
the one with the numpty that you turn on and turn for flow rate andrew
Title: Re: Anyone got a brodex machine?
Post by: tigger on January 12, 2009, 02:52:33 pm
 I  have a brodex always going wrong !
Title: Re: Anyone got a brodex machine?
Post by: Andrew McCann on January 12, 2009, 04:20:39 pm
the one with the numpty that you turn on and turn for flow rate andrew

Simon has already posted an answer but to elaborate:

You need to open the front of your varistream. Open it carefully. Look on the front cover and you should see a small blue numpty. It will be set against a letter. Like Simon says turn your pump on with it attached to your reel and if you have an on/off valve make sure it is open.

Now turn the blue dial up ONE LETTER AT A TIME until your pump works uninterupted. You don't have to close the varistream to do this. So.. when you have a nice flow coming from the hose shut your valve and your pump should cut out in a few seconds.

What you are doing is increasing the shut off pressure to compensate for the more restricred flow given by minibore.

Hope this helps

Andrew  :)
Title: Re: Anyone got a brodex machine?
Post by: East coast window cleaning Services on January 12, 2009, 04:21:48 pm
all done ta very much lads ;D