Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: ronnie paton on January 08, 2009, 09:33:19 pm
-
firstly my female hose connectors the ez snap ones just dont last long enough and im fed up of constantly changing them can any one tell me what connector they feel is best?
and
i keep putting brackets on the ply in my van but they pull doen in time with the constant moving of the poles any help would be appreciated
-
i get my connections from a local hydraulics &pneumatics supplier (much more solid)and either have an in line on/off switch or use the use the sponge practise golf balls or a tennis ball to protect them when you drop them after dis-connecting.
-
I had loads of trouble with the female connectors to. I used to use a stop valve in a leather holster and connect my pole hose to one side and the microbore to the other. A lot of dropping and dragging of connections happened and they would be constantly leaking or failing.
Several months ago we changed to triggers. The microbore connects straight to the base of the trigger on the pole. Because its attached we no longer remove the pole until we have walked it back to the van. we then wind in and then disconnect the trigger. Consequently the females are not getting dragged or dropped and therefore they seem to be lasting.
Hope that helps.
-
where do you get your triggers from
-
Varitech - Theirs are a bit different as they are mounted on a sleeve that can be moved up and down the pole to suit.
Varitech's number 01626 830830