Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: paul_smith on March 10, 2005, 09:16:38 pm

Title: Truckmounts
Post by: paul_smith on March 10, 2005, 09:16:38 pm

john gott from hydramaster is attending the day out (milton Keyns) and is willing to bring any truckmount,what would you like to see most?
I will ask him once anyone gives preferences.
Looking forward to seeing this plus prochems,aswell as sollutions eclipse and other stuff
Cheers
Paul

Title: Re: Truckmounts
Post by: mark_roberts on March 10, 2005, 09:22:44 pm

Boxer

Rotary drimaster

Title: Re: Truckmounts
Post by: paul_smith on March 11, 2005, 01:57:48 pm

Is the dry master the same thing as the RX20?if so iwill ask him to bring it or both as the case may be!
I would also like to see the boxer or the new 427,so i will see what he can bring
Cheers Paul

Title: Re: Truckmounts
Post by: Phil Marlor on March 11, 2005, 10:25:14 pm

Wouldnt mind seeing the hose washer and how it works.

Phil

Title: Re: Truckmounts
Post by: Glynn on March 11, 2005, 10:39:14 pm

The DriMaster carpet tool is NOT like the RX20. It differs inthat it uses no jets , instead it utilises a flat spray bar which is in full contact with the carpet, this is immediatly followed by the vac slot. The scrubbing action is caused by the rotary motion of 3 cleaning heads. Just like a large version of the DriMaster upholstery tool but 3 fold, larger and rotating. They are an EXCELLENT tool, bur more suited to truckmounts due to the water required and the heat and vacuum required. The RX20 is a different animal, it uses 5x jets matched to 5 x vac shoes ,the vac shoes cause the aggresive scrubbing action. Again the RX20 is more suited to truckmounts as the amount of water they consume would constitute the continual need for refilling and continual emptying of portables.

Title: Re: Truckmounts
Post by: John_Flynn on March 12, 2005, 04:39:22 am

Cornish Pasties and his MISSUS to cook em  :P :P :P ::) ::) :P :P :P

Title: Re: Truckmounts
Post by: dave401uk on March 12, 2005, 08:23:43 am

yes the pasties, the warmest stand at the NEC ;D

Title: Re: Truckmounts
Post by: paul_smith on March 12, 2005, 03:45:18 pm

i will request boxer,427,rx20,drymaster and 200 pasties!anything else?
Cheers Paul

Title: Re: Truckmounts
Post by: paul@ctcs on March 12, 2005, 05:07:04 pm

ooh and scones like the ones at carpex 8)

Paul

Title: Re: Truckmounts
Post by: Phil Marlor on March 13, 2005, 09:26:12 pm

I heard Chemspec were a little dissapointed not to be invited to the MK event.

Phil

Title: Re: Truckmounts
Post by: Shaun_Ashmore on March 13, 2005, 09:34:14 pm

Why not invite them, the more the merrier!

I know they all get along, that's no kidding, well would you mess with Mr.G?

from Shaun who is not going