Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: STEVE-UK on December 03, 2008, 05:37:13 pm
-
i need to convert my van to run 2 pumps by tomorrow
ive got the hose and pump sorted,
can you split the hose and run 2 pumps through 1 25 litre di vessel
-
I would say yes because if you look at the label on your DI Vessel it will tell you the max PSI. Just looked at the ones we sell and they can take upto 150 PSI.
-
its the volume of water it has to handle i was wandering about,
would you get the same amount of water from each hose if one pole was doing 60 ft and the other was doing ground floor
-
If you put the di before the pumps I cant's see it being a problem, the flow rate for wfp on 2 pumps wouldn't be too much, some ro systems push out a higher volume of water through a single di.. There wouldn't be any pressure there either as it would be before the pumps. You might want to fit a one way valve before the di though to stop air locks from happening inside the di.
Just a thought, what tds are you putting through it, is it ro water or tap? ro water no probs at all, tap probably not but you might want to ask someone who is di only.